10G SFP+, 100 GHz Grid - C-Band DWDM ZR+ with dual CDR 100 km / 25 dB, LC-Duplex

Universal SFP+ Transceiver - 100 GHz Grid - C-Band
Use FLEXBOX to configure to almost any vendor
DWDM for multiple applications over one duplex fiber
For 10GBASE-ZR+ Ethernet links
Supported Data Rates: 9.95 Gbit/s - 11.3 Gbit/s with dual CDR
Powerbudget of 25 dB for up to 100 km using an OS2 ITU-T G.652 fiber
Specs
  • DWDM 100 GHz
  • 100 km
  • 11.3 G
  • Dual CDR
Protocols
  • 10G ETH
  • 10G FC
  • OTU2
  • STM-64
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
P.1696.25.yy.R

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Lower Power Budget
10G SFP+, 100 GHz Grid - C-Band DWDM ZR with dual CDR 80 km / 23 dB, LC-Duplex 
10G SFP+, 100 GHz Grid - C-Band DWDM ZR with dual CDR | 80 km / 23 dB, LC-Duplex
As low as 592.52 EUR
Fixed Optical Attenuator LC Singlemode  
Fixed Optical Attenuator LC Singlemode
As low as 13.72 EUR

Specification

Form Factor SFP+
Connector / Polish LC-Duplex PC
Interface DWDM
Compliance Code DWDM ZR+
Distance 100 km
Temperature Range 0°C - 70°C
Bandwidth 9.95 Gbit/s - 11.3 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 2.3 W
CDR TX and RX
Inbuilt FEC No
Powerbudget (dB) 25 dB
Transmit min/max per lane 0 dBm / 5 dBm
Receiver min/max per lane -25 dBm / -8 dBm (overload) @10G
Wavelength TX (Typical) Channel 61 - 1528.77 nm
Wavelength RX (Range) 1520 - 1600 nm
Laser EML
Receiver Type APD
Modulation NRZ @10G
Transmit and Dispersion Penalty 3 dB
Chromatic Dispersion Tolerance -500 ps/nm to 1,600 ps/nm @10G
Extinction Ratio 9 dB
Supported Protocols 10G Ethernet, 10G FC, OTU2, STM-64

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Brocade 10G-SFPP-ER compatible
  • Cisco Systems SFP-10G-ZR compatible
  • Edge Core ET5402-ZR-I compatible
  • Huawei OSX080N01 compatible
  • Juniper QFX-SFP-10GE-ER compatible
Your vendor / compatibility is missing?

What customers say

It's just a genius device. So easy to use and simple! I would recommend it to every network engineer. Plug-in the module, program and its ready for deployment!
David Schoefberger Schoefberger
We will now be able to source all our SFPs from a single vendor without having to worry about the configuration. That translates to peace of mind and huge flexibility. Well done guys!
Gregory Agerba CTO, Neocarrier Communications
For years we struggled with hundreds of transceivers from different vendors but this is finally over! With FLEXBOX we can easily reconfigure our transceivers which in the end saves a lot of time and money.
Marcel Wösle Director Infrastructure Services, Avira Operations GmbH & Co.KG

The SFPs easily integrated with our existing network equipment, ensuring cross-vendor compatibility. The build quality is very good.
Connecting to the FLEXBOX with an Android phone took only a few seconds, and configuring the SFPs was a breeze. We really liked the ability to configure multiple SFPs at once. Shipping is incredibly fast. Support is friendly, technical and helpful.

Sebastian Giss System Engineer/cyon.ch
More