100M SFP FX Industrial 2 km, λ1310 nm, DDM, LC-Duplex, Multimode
- 1310 nm
- 2 km
- 155 M
- Industrial
- 100M ETH
- STM-1
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Multimode |
| Compliance Code | FX |
| Distance | 2 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 100 Mbit/s - 155 Mbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 11 dB |
| Transmit min/max per lane | -19 dBm / -14 dBm |
| Receiver min/max per lane | -30 dBm / -5 dBm (overload) @100M - 800M |
| Wavelength TX (Typical) | 1310 nm |
| Wavelength TX (Range) | 1260 - 1360 nm |
|---|---|
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1620 nm |
| Laser | FP |
| Receiver Type | PIN |
| Modulation | NRZ @100M - 800M |
| Extinction Ratio | 8.2 dB |
| Supported Protocols | Fast Ethernet, STM-1 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks # 13193 compatible
- ADTRAN 1184543P3 compatible
- ADVA # 13194 compatible
- Advantech B+B SmartWorx BB-857-11911TG compatible
- Advantech SFP-FXM/LCI-AE compatible
- Allied Telesis # 13196 compatible
- Aruba Networks(ex. HP Network) # 13191 compatible
- Avara SFP-DFW-FE-T85R85-M2 compatible
- Avaya (ex. Nortel) AA1419074-E6 compatible
- barox AC-SFP-FXMME compatible
- Brocade / Ruckus E1MG-100FX-OM compatible
- Check Point # 13201 compatible
- Ciena (ex. Nortel) NTTP02AD compatible
- Cisco Systems GLC-FE-100FX compatible
- Cisco Systems GLC-FE-100FX-RGD compatible
- D-LINK DEM-211 compatible
- Dell (ex. Force10) # 13212 compatible
- Dell 407-BBOT compatible
- Extreme (ex. Enterasys) # 13206 compatible
- Extreme 10067 compatible
- FibroLAN # 13209 compatible
- Fluke Networks # 13211 compatible
- Fortinet FG-TRAN-LX compatible
- Fortinet FS-TRAN-FX compatible
- Fujitsu # 13214 compatible
- H3C (ex. 3COM) # 13192 compatible
- Hirschmann M-FAST SFP-MM/LC EEC compatible
- HP H3C # 13215 compatible
- Huawei SFP-FE-SX-MM1310 compatible
- Infinera (ex. Transmode) # 13234 compatible
- Intel # 13218 compatible
- Juniper (ex BTI Systems) # 13200 compatible
- Keymile # 13220 compatible
- Korenix SFP100MMD-w compatible
- KTI Networks SFP-FI-M-A compatible
- kvm-tec KT-7008 compatible
- Lenovo (ex. Blade Network) # 13217 compatible
- LevelOne SFP-2200 compatible
- MikroTik # 13223 compatible
- Moxa SFP-1FEMLC-T compatible
- MRV # 13225 compatible
- Netgear AFM735 compatible
- Nokia (ex. Alcatel-Lucent) 3FE25778AA compatible
- Nokia Siemens Networks # 13227 compatible
- Palo Alto Networks # 13229 compatible
- Perle PSFP-100D-M2LC2-XT compatible
- Planet MFB-TFX compatible
- Radware # 13230 compatible
- Redlion (ex. Sixnet) FMFIBER-SFP-4K compatible
- Ribbon (ex. ECI) # 13205 compatible
- TP-LINK # 13232 compatible
- Transition Networks TN-SFP-OC3MT compatible
- Ubiquiti Networks SFP FX compatible
- Waystream (ex. Packetfront) # 13228 compatible
- Westermo 1100-0531 compatible
What customers say
I wanted to take a moment to provide some feedback regarding the on-site programming capabilities of your FLEXOPTIX product. I must say that being able to program SFPs on-site according to our specific requirements has been an incredibly valuable feature for our network infrastructure. The convenience and efficiency it offers have exceeded our expectations.
One of the standout benefits we have experienced is the rapid deployment it enables. Being able to respond quickly to changing network needs without having to wait for orders from different vendors has significantly reduced our deployment time. This has improved our operational efficiency and allowed us to be more agile in meeting our organization's evolving demands.
Moreover, the cost savings we have achieved through on-site programming have been remarkable. By eliminating the need to order pre-configured SFPs from various vendors, we have saved on shipping costs, streamlined our inventory management, and bypassed vendor-specific pricing structures. This flexibility has positively impacted our budgeting and overall equipment expenses.
This is simply a brilliant idea and product! Thank you!