100M SFP EX 40 km, λ1310 nm, DDM, LC-Duplex, Singlemode
Universal SFP Transceiver
Use FLEXBOX to configure to almost any vendor
For 100M - 800MBASE-EX Ethernet links
Supported Data Rates: 125 Mbit/s - 155 Mbit/s
Up to 40 km via Singlemode OS2
LC-Duplex Connector
Digital Diagnocstic Monitoring (DDM)
Specs
- 1310 nm
- 40 km
- 155 M
Protocols
- 100M ETH
- STM-1
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | SFP |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Compliance Code | EX |
Distance | 40 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 125 Mbit/s - 155 Mbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
Power Consumption | 1 W |
---|---|
CDR | none |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 29 dB |
Transmit min/max per lane | -5 dBm / 0 dBm |
Receiver min/max per lane | -34 dBm / -10 dBm (overload) @100M - 800M |
Wavelength TX (Typical) | 1310 nm |
Wavelength TX (Range) | 1260 - 1360 nm |
---|---|
Wavelength RX (Typical) | 1310 nm |
Wavelength RX (Range) | 1260 - 1600 nm |
Laser | FP |
Receiver Type | PIN |
Modulation | NRZ @100M - 800M |
Extinction Ratio | 10 dB |
Supported Protocols | Fast Ethernet, STM-1 |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADTRAN 1184543P1 compatible
- ADTRAN 1184543PG1 compatible
- ADVA 0061003003 compatible
- Advantech SFP-FXS/LC-30E compatible
- Alcatel-Lucent Ent. SFP-100-SM40 compatible
- Allied Telesis AT-SPFX40 compatible
- Barnfind BTSFP-LX-SM-0140 compatible
- Brocade / Ruckus E1MG-100FX-LR-OM compatible
- Brocade / Ruckus OC3-SFP-LR1 compatible
- Ciena (ex. Nortel) NTTP02ED compatible
- Ciena (ex. Nortel) NTTP08EDE6 compatible
- Ciena XCVR-040X31 compatible
- Cisco Systems GLC-FE-100EX compatible
- Cisco Systems ONS-SI-155-L1 compatible
- Cisco Systems SFP-OC3-LR1 compatible
- ComNet SFP-4 compatible
- Coriant (ex. Tellabs) TR-0002 compatible
- Ericsson RDH90120/B0228 compatible
- Extreme 10066 compatible
- FiberPlex SFP-SC03XC-3131-C compatible
- Hirschmann M-FAST SFP-SM/LC compatible
- HP H3C JD090A compatible
- Huawei eSFP-1310nm-L-1.1 compatible
- Huawei eSFP-FE-LH40-SM1310 compatible
- Huawei S-SFP-FE-LH40-SM1310 compatible
- Keymile 37973053 compatible
- Korenix SFP100SM30 compatible
- KTI Networks SFP-FCD-S30-A compatible
- LevelOne SFP-1411 compatible
- Marconi SU66AB compatible
- MRV SFP-O3D-LR1 compatible
- Net Insight NPA0016-LL11 compatible
- Nexans 88645907 compatible
- Nokia (ex. Alcatel-Lucent) 1AB194670005 compatible
- Nokia (ex. Alcatel-Lucent) 1AB376350002 compatible
- Nokia (ex. Alcatel-Lucent) 3HE00036AA compatible
- Nokia (ex. Alcatel-Lucent) OM155M-L1.1 compatible
- Nokia Siemens Networks V50017-U324-K500 compatible
- Nokia-Siemens (ex. Atrica) AT10015-ID-R compatible
- Perle PSFP-100D-S2LC40 compatible
- Planet MFB-F40 compatible
- RAD SFP-3D compatible
- Ribbon (ex. ECI) OTFE_SM compatible
- Ribbon (ex. ECI) OTR1_L3 compatible
- SagemCOM 252586245 compatible
- Telco Systems BTI-SFP-FEX-DD-LC compatible
- Transition Networks TN-SFP-OC3S3 compatible
- Volktek FPM-107-30 compatible
- Westermo 1100-0133 compatible
Your vendor / compatibility is missing?
What customers say
FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.
Sven Gebhardt
Head of Platforms & Services, grandcentrix GmbH
The FLEXBOX is really a great tool. It allows me to quickly re-configure transceivers. Nice additional feature is the "Power Meter & Source" tool. It allows, without additional hardware, a quick check of optical transceivers, fiber cables, fiber connections etc.
René Oskar Kühne
Retired scientist, now acting in the field of IT support, R.O. Kuehne
For years we struggled with hundreds of transceivers from different vendors but this is finally over!
With FLEXBOX we can easily reconfigure our transceivers which in the end saves a lot of time and money.
Marcel Wösle
Director Infrastructure Services, Avira Operations GmbH & Co.KG
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
Erwin ter Hofstede
CEO, EC-Hosting