STM-4 SFP CWDM ~80 km / 28 dB, 1270 nm - 1610 nm, DDM, LC-Duplex

Universal SDH SFP Transceiver - CWDM
Use FLEXBOX to configure to almost any vendor
CWDM for multiple applications over one duplex fiber
Capable of operating in SDH / SONET networks
Supported Data Rates: 100 Mbit/s - 622 Mbit/s
Powerbudget of 28 dB for up to 80 km using an OS2 ITU-T G.652 fiber
Digital Diagnostic Monitoring (DDM)
Specs
  • CWDM
  • ~80 km / 28 dB
  • 622 M
Protocols
  • 100M ETH
  • STM-1
  • STM-4
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
S.1606.28.xD
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface CWDM
Type CWDM STM-4
Distance 80 km
Temperature Range 0°C - 70°C
Bandwidth 100 Mbit/s - 622 Mbit/s
Digital Diagnostic Management (DDM) Internally Calibrated
Power Consumption 1 W
CDR none
Inbuilt FEC No
Powerbudget (dB) 28 dB
Transmit min/max per lane 0 dBm / 5 dBm
Receiver min/max per lane -28 dBm / -8 dBm (overload)
Wavelength TX (Typical) Channel R - 1610 nm
Wavelength RX (Range) 1100 - 1650 nm
Laser DFB
Receiver Type PIN
Modulation NRZ
Transmit and Dispersion Penalty 1 dB
Extinction Ratio 8.2 dB
Supported Protocols Fast Ethernet, STM-1, STM-4

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • A10networks # compatible
  • ADTRAN 1442703PG8 compatible
  • ADVA # compatible
  • Allied Telesis # compatible
  • Aruba Networks(ex. HP Network) # compatible
  • Avaya (ex. Nortel) # compatible
  • Brocade # compatible
  • Brocade / Ruckus E1MG-100FX-LR-OM compatible
  • Check Point # compatible
  • Ciena (ex. Nortel) NTTP04CF compatible
  • Ciena XCVR-080D61 compatible
  • Cisco Systems # compatible
  • D-LINK # compatible
  • Dell # compatible
  • Edge Core # compatible
  • Ericsson RDH90120/61728 compatible
  • Extreme # compatible
  • Extreme (ex. Enterasys) # compatible
  • F5 Networks # compatible
  • FibroLAN # compatible
  • Fluke Networks # compatible
  • Force10 / Juniper # compatible
  • Fortinet # compatible
  • Fujitsu # compatible
  • H3C (ex. 3COM) # compatible
  • Hirschmann # compatible
  • HP H3C # compatible
  • Huawei # compatible
  • Infinera (ex. Transmode) # compatible
  • Intel # compatible
  • Juniper # compatible
  • Juniper (ex BTI Systems) # compatible
  • Keymile # compatible
  • KTI Networks # compatible
  • LANCOM # compatible
  • Lenovo (ex. Blade Network) # compatible
  • LevelOne # compatible
  • Lynx # compatible
  • Marconi SU67AC compatible
  • MikroTik # compatible
  • Motorola # compatible
  • Moxa # compatible
  • MRV # compatible
  • Netgear # compatible
  • Nokia (ex. Alcatel-Lucent) # compatible
  • Nokia Siemens Networks V50017-U332-K500 compatible
  • Palo Alto Networks # compatible
  • Radware # compatible
  • Ribbon (ex. ECI) # compatible
  • TP-LINK # compatible
  • Transition Networks TN-SFP-OC12S-C61 compatible
  • Ubiquiti Networks # compatible
  • Waystream (ex. Packetfront) # compatible
Your vendor / compatibility is missing?

What customers say

On more than one occasion the flexbox significantly saved time for me by not having to scrub a deployment session but simply reconfigure a transceiver and carry on. This alone is a good reason that secures the flexbox a non-negotiable place in my datacenter-go-bag. However what really sets flexoptix apart is not them solving an irritating problem we all know. No. It is their vast inventory and know-how paired with impeccable QA. If I have a need for transceivers it is my single go-to source for procurement. They have exactly what I need in stock even before I know I need it, and when I need it, I can trust the order is in my hands in no time. Every single time. I can configure and deploy without doubt and without delay. It is rare to find such a valuable and dependable partner that reliably takes away a whole set of problems while offering decent pricing and a customer support that is above reproach.
Michael Horn Telecommunications Infrastructure Security Professional
FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.
Sven Gebhardt Head of Platforms & Services, grandcentrix GmbH

FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.

Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models

now I can operate and adapt to each on site production.

Emilio Vargas Production Manager / Liga ACE esports

I wanted to take a moment to provide some feedback regarding the on-site programming capabilities of your FLEXOPTIX product. I must say that being able to program SFPs on-site according to our specific requirements has been an incredibly valuable feature for our network infrastructure. The convenience and efficiency it offers have exceeded our expectations.

One of the standout benefits we have experienced is the rapid deployment it enables. Being able to respond quickly to changing network needs without having to wait for orders from different vendors has significantly reduced our deployment time. This has improved our operational efficiency and allowed us to be more agile in meeting our organization's evolving demands.

Moreover, the cost savings we have achieved through on-site programming have been remarkable. By eliminating the need to order pre-configured SFPs from various vendors, we have saved on shipping costs, streamlined our inventory management, and bypassed vendor-specific pricing structures. This flexibility has positively impacted our budgeting and overall equipment expenses.

This is simply a brilliant idea and product! Thank you!

Michal Szarecki IT Engineer/ pmitsolutions.ie
More