STM-4 SFP CWDM ~140 km / 39 dB, 1270 nm - 1610 nm, DDM, LC-Duplex

Universal SDH SFP Transceiver - CWDM
Use FLEXBOX to configure to almost any vendor
CWDM for multiple applications over one duplex fiber
Capable of operating in SDH / SONET networks
Supported Data Rates: 100 Mbit/s - 622 Mbit/s
Powerbudget of 39 dB for up to 140 km using an OS2 ITU-T G.652 fiber
Digital Diagnostic Monitoring (DDM)
Specs
  • CWDM
  • ~140 km / 39 dB
  • 622 M
Protocols
  • 100M ETH
  • STM-1
  • STM-4
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
S.1606.39.xD

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Higher Temperature Range
STM-4 SFP CWDM Extended ~140 km / 39 dB, 1270 nm - 1610 nm, DDM, LC-Duplex 
STM-4 SFP CWDM Extended | ~140 km / 39 dB, 1270 nm - 1610 nm, DDM, LC-Duplex
As low as 213.96 EUR
LC-Duplex to LC-Duplex Singlemode cable A1 9/125 µm, yellow, 0.25 m - 100 m 
LC-Duplex to LC-Duplex Singlemode cable | A1 9/125 µm, yellow, 0.25 m - 100 m
As low as 12.20 EUR
LWL Fibre Cleaner LC / Belt clip edition  
LWL Fibre Cleaner LC / Belt clip edition
31 pcs in stock 94.05 EUR

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface CWDM
Compliance Code CWDM STM-4
Distance 140 km
Temperature Range 0°C - 70°C
Bandwidth 100 Mbit/s - 622 Mbit/s
Digital Diagnostic Management (DDM) Internally Calibrated
Power Consumption 1 W
CDR none
Inbuilt FEC No
Powerbudget (dB) 39 dB
Transmit min/max per lane 2 dBm / 7 dBm
Receiver min/max per lane -37 dBm / -10 dBm (overload) @100M - 800M
Wavelength TX (Typical) Channel R - 1610 nm
Wavelength RX (Range) 1100 - 1650 nm
Laser DFB
Receiver Type APD
Modulation NRZ @100M - 800M
Transmit and Dispersion Penalty 1 dB
Extinction Ratio 8.2 dB
Supported Protocols Fast Ethernet, STM-1, STM-4

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Brocade / Ruckus E1MG-100FX-LR-OM compatible
  • Ribbon (ex. ECI) OTR1_S3 compatible
  • Ribbon (ex. ECI) OTR4_S3 compatible
Your vendor / compatibility is missing?

What customers say

Great products. When you hold them in your hands, you see the care for qualitiy and product details. I strongly recommend Flexoptix' products.
Dariusz Siedlecki Nettec
Definitely, FLEXOPTIX will be my optics supplier from today. The ability to compatibilize optics across multiple vendors is going to save us from many headaches. The FLEXBOX is a must for any company using optical network equipment.
Miguel Bérniz Chief Technical Officer, GibFibre Ltd

The SFPs easily integrated with our existing network equipment, ensuring cross-vendor compatibility. The build quality is very good.
Connecting to the FLEXBOX with an Android phone took only a few seconds, and configuring the SFPs was a breeze. We really liked the ability to configure multiple SFPs at once. Shipping is incredibly fast. Support is friendly, technical and helpful.

Sebastian Giss System Engineer/cyon.ch
The FLEXBOX is really a great tool. It allows me to quickly re-configure transceivers. Nice additional feature is the "Power Meter & Source" tool. It allows, without additional hardware, a quick check of optical transceivers, fiber cables, fiber connections etc.
René Oskar Kühne Retired scientist, now acting in the field of IT support, R.O. Kuehne
More