100BASE-TX Copper SFP 100 m, RJ-45, Autoneg, RX_LOS, SERDES, 10 Mbit/s - 125 Mbit/s

Universal Copper SFP Transceiver
Use FLEXBOX to configure to almost any vendor
Supported Data Rates: 10 Mbit/s - 125 Mbit/s
Up to 100 m via CAT5e Cable
RJ-45 connector
Specs
  • Copper
  • 100 m
  • 125 M
Protocols
  • 100M ETH
  • 10M ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
T.C03.02.E:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

Higher Temperature Range
100BASE-TX Industrial Copper SFP 100 m, RJ-45, Autoneg, RX_LOS, SERDES, 10 Mbit/s - 125 Mbit/s 
100BASE-TX Industrial Copper SFP | 100 m, RJ-45, Autoneg, RX_LOS, SERDES, 10 Mbit/s - 125 Mbit/s
109 pcs in stock As low as 69.13 EUR

Specification

Form Factor SFP
Connector / Polish RJ-45
Interface Copper
Compliance Code T
Distance 100 m
Temperature Range 0°C - 70°C
Bandwidth 10 Mbit/s - 125 Mbit/s
Digital Diagnostic Management (DDM) not implemented
Power Consumption 1.05 W
Supported Protocols Ethernet, Fast Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Cisco Systems GLC-FE-T-I compatible
  • Hirschmann M-FAST SFP-TX compatible
  • Moxa SFP-1FEMLC-T compatible
  • Nokia (ex. Alcatel-Lucent) 3FE63343AA compatible
  • Nokia-Siemens (ex. Atrica) [100TX] compatible
  • Planet MFB-FX compatible
  • Riverstone SFPFX-09 compatible
  • Westermo 1100-0172 compatible
  • Zyxel SFP-100T compatible
Your vendor / compatibility is missing?

What customers say

FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.
Sven Gebhardt Head of Platforms & Services, grandcentrix GmbH
On more than one occasion the flexbox significantly saved time for me by not having to scrub a deployment session but simply reconfigure a transceiver and carry on. This alone is a good reason that secures the flexbox a non-negotiable place in my datacenter-go-bag. However what really sets flexoptix apart is not them solving an irritating problem we all know. No. It is their vast inventory and know-how paired with impeccable QA. If I have a need for transceivers it is my single go-to source for procurement. They have exactly what I need in stock even before I know I need it, and when I need it, I can trust the order is in my hands in no time. Every single time. I can configure and deploy without doubt and without delay. It is rare to find such a valuable and dependable partner that reliably takes away a whole set of problems while offering decent pricing and a customer support that is above reproach.
Michael Horn Telecommunications Infrastructure Security Professional

We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.

Axel Hauguel CEO / Dyjix

I wanted to take a moment to provide some feedback regarding the on-site programming capabilities of your FLEXOPTIX product. I must say that being able to program SFPs on-site according to our specific requirements has been an incredibly valuable feature for our network infrastructure. The convenience and efficiency it offers have exceeded our expectations.

One of the standout benefits we have experienced is the rapid deployment it enables. Being able to respond quickly to changing network needs without having to wait for orders from different vendors has significantly reduced our deployment time. This has improved our operational efficiency and allowed us to be more agile in meeting our organization's evolving demands.

Moreover, the cost savings we have achieved through on-site programming have been remarkable. By eliminating the need to order pre-configured SFPs from various vendors, we have saved on shipping costs, streamlined our inventory management, and bypassed vendor-specific pricing structures. This flexibility has positively impacted our budgeting and overall equipment expenses.

This is simply a brilliant idea and product! Thank you!

Michal Szarecki IT Engineer/ pmitsolutions.ie
More