2.67G SFP STM-16 BiDi 100 km, ᵀˣ1490 / ᴿˣ1550 nm, DDM, LC-Simplex, Singlemode
- 1490 nm
- 100 km
- 2.67 G
- BiDi
- 1G ETH
- 1G FC
- 2G FC
- STM-1
- STM-16
- STM-4
-
Matching Products
-
Matching Products
Specification
Form Factor | SFP |
---|---|
Connector / Polish | LC-Simplex UPC |
Interface | Singlemode BiDi |
Compliance Code | BiDi STM-16 |
Distance | 100 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 155 Mbit/s - 2.67 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, externally calibrated |
Power Consumption | 1 W |
CDR | none |
---|---|
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 29 dB |
Transmit min/max per lane | 0 dBm / 5 dBm |
Receiver min/max per lane | -29 dBm / -8 dBm (overload) @2G |
Wavelength TX (Typical) | 1490 nm |
Wavelength TX (Range) | 1484 - 1497.5 nm |
Wavelength RX (Typical) | 1550 nm |
Wavelength RX (Range) | 1530 - 1570 nm |
---|---|
Laser | DFB |
Receiver Type | APD |
Modulation | NRZ @2G |
Transmit and Dispersion Penalty | 1 dB |
Extinction Ratio | 9 dB |
Supported Protocols | 1G Fibre Channel, 2G Fibre Channel, Gigabit Ethernet, STM-1, STM-16, STM-4 |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks # compatible
- ADTRAN # compatible
- ADVA # compatible
- Allied Telesis # compatible
- Arista 3rd_Party SFP-1G-LX compatible
- Arista SFP-1G-LX compatible
- Aruba Networks(ex. HP Network) # compatible
- Avaya (ex. Nortel) # compatible
- Brocade # compatible
- Check Point # compatible
- Ciena (ex. Nortel) # compatible
- Cisco Systems # compatible
- D-LINK # compatible
- Dell # compatible
- Dell (ex. Force10) # compatible
- Edge Core # compatible
- Ericsson # compatible
- Extreme # compatible
- Extreme (ex. Enterasys) # compatible
- F5 Networks # compatible
- FibroLAN # compatible
- Fluke Networks # compatible
- Fortinet # compatible
- Fujitsu # compatible
- H3C (ex. 3COM) # compatible
- Hirschmann # compatible
- HP H3C # compatible
- Huawei # compatible
- Infinera (ex. Transmode) TRX100080 compatible
- Intel # compatible
- Juniper # compatible
- Juniper (ex BTI Systems) # compatible
- Keymile # compatible
- KTI Networks # compatible
- LANCOM # compatible
- Lenovo (ex. Blade Network) # compatible
- LevelOne # compatible
- Lynx # compatible
- Marconi SU67AC compatible
- Marconi SU68AD compatible
- MikroTik # compatible
- Motorola # compatible
- Moxa # compatible
- MRV # compatible
- Net Insight NPA0022-XL21 compatible
- Netgear # compatible
- Nokia (ex. Alcatel-Lucent) 1AB194670006 compatible
- Nokia (ex. Alcatel-Lucent) 1AB196360007 compatible
- Nokia (ex. Alcatel-Lucent) 1AB196370009 compatible
- Nokia (ex. Alcatel-Lucent) 1AB376370004 compatible
- Nokia Siemens Networks V50017-U330-K500 compatible
- Nvidia (ex. Mellanox) # compatible
- Palo Alto Networks # compatible
- Quanta # compatible
- Radware # compatible
- TP-LINK # compatible
- Transition Networks # compatible
- Ubiquiti Networks # compatible
- Waystream (ex. Packetfront) # compatible
- Zyxel # compatible
What customers say
The new FLEXOPTIX 400GBASE-ZR modules are lit. We’ve been running a few of them in production and they just work. Awesome support from FLEXOPTIX. Keep up the good work!
I wanted to take a moment to provide some feedback regarding the on-site programming capabilities of your FLEXOPTIX product. I must say that being able to program SFPs on-site according to our specific requirements has been an incredibly valuable feature for our network infrastructure. The convenience and efficiency it offers have exceeded our expectations.
One of the standout benefits we have experienced is the rapid deployment it enables. Being able to respond quickly to changing network needs without having to wait for orders from different vendors has significantly reduced our deployment time. This has improved our operational efficiency and allowed us to be more agile in meeting our organization's evolving demands.
Moreover, the cost savings we have achieved through on-site programming have been remarkable. By eliminating the need to order pre-configured SFPs from various vendors, we have saved on shipping costs, streamlined our inventory management, and bypassed vendor-specific pricing structures. This flexibility has positively impacted our budgeting and overall equipment expenses.
This is simply a brilliant idea and product! Thank you!