4G Fibre Channel SFP BiDi Industrial 40 km, ᵀˣ1310 / ᴿˣ1550 nm, DDM, LC-Simplex, Singlemode
Universal Fibre Channel SFP BiDi Transceiver
Use FLEXBOX to configure to almost any vendor
Double your bandwith by using only one fiber for transmit and receive
Fibre Channel (FC) support for storage area network (SAN) interconnect
Supported Data Rates: 1 Gbit/s - 4.25 Gbit/s
Up to 40 km via Singlemode OS2
LC-Simplex Connector
Operating Temperature from -40°C to 85°C, Digital Diagnocstic Monitoring (DDM)
Specs
- 1310 nm
- 40 km
- 4.25 G
- Industrial
Protocols
- 1G ETH
- 1G FC
- 2G FC
- 4G FC
- STM-16
-
Matching Products
-
Matching Products
Specification
Form Factor | SFP |
---|---|
Connector / Polish | LC-Simplex UPC |
Interface | Singlemode BiDi |
Compliance Code | BiDi 4G FC LW |
Distance | 40 km |
Temperature Range | -40°C - 85°C |
Bandwidth | 1 Gbit/s - 4.25 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, externally calibrated |
Power Consumption | 1 W |
---|---|
CDR | none |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 16 dB |
Transmit min/max per lane | 0 dBm / 5 dBm |
Receiver min/max per lane | -16 dBm / 0 dBm (overload) @4G |
Wavelength TX (Typical) | 1310 nm |
Wavelength TX (Range) | 1290 - 1330 nm |
---|---|
Wavelength RX (Typical) | 1550 nm |
Wavelength RX (Range) | 1500 - 1600 nm |
Laser | DFB |
Receiver Type | PIN |
Modulation | NRZ @4G |
Supported Protocols | 1G Fibre Channel, 2G Fibre Channel, 4G Fibre Channel, Gigabit Ethernet, STM-16 |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks # 11853 compatible
- ADVA # 11854 compatible
- Allied Telesis # 11856 compatible
- Arista 3rd_Party SFP-1G-LX compatible
- Arista SFP-1G-LX compatible
- Aruba Networks(ex. HP Network) # 11851 compatible
- Avaya (ex. Nortel) # 11858 compatible
- Brocade # 11859 compatible
- Check Point # 11861 compatible
- Ciena (ex. Nortel) # 11862 compatible
- Cisco Systems # 11850 compatible
- D-LINK # 11864 compatible
- Dell # 11863 compatible
- Dell (ex. Force10) # 11871 compatible
- Extreme # 11867 compatible
- Extreme (ex. Enterasys) # 11866 compatible
- F5 Networks # 11868 compatible
- FibroLAN # 11869 compatible
- Fluke Networks # 11870 compatible
- Fortinet # 11872 compatible
- Fujitsu # 11873 compatible
- H3C (ex. 3COM) # 11852 compatible
- Hirschmann # 11874 compatible
- HP H3C # 11875 compatible
- Huawei # 11876 compatible
- Infinera (ex. Transmode) # 11893 compatible
- Intel # 11878 compatible
- Juniper # 11879 compatible
- Juniper (ex BTI Systems) # 11860 compatible
- KTI Networks # 11880 compatible
- LANCOM # 11881 compatible
- Lenovo (ex. Blade Network) # 11877 compatible
- LevelOne # 11882 compatible
- MikroTik # 11883 compatible
- Moxa # 11884 compatible
- MRV # 11885 compatible
- Netgear # 11886 compatible
- Nokia (ex. Alcatel-Lucent) # 11855 compatible
- Nokia Siemens Networks # 11887 compatible
- Palo Alto Networks # 11889 compatible
- Radware # 11890 compatible
- Ribbon (ex. ECI) # 11865 compatible
- TP-LINK # 11891 compatible
- Transition Networks # 11892 compatible
- Waystream (ex. Packetfront) # 11888 compatible
Your vendor / compatibility is missing?
What customers say
The FLEXBOX was easy to set up and use, and the programmable transceivers worked seamlessly in several different brand devices. This will make our spares much easier to manage.
Shaun James
Engineering Inspector, Tata Steel Strip Products UK
Ordering and using FLEXOPTIX transceivers was far quicker than even getting a quote from traditional vendors.
Using the FLEXBOX is super easy and fast - 5 minutes to get transceivers ready including unboxing and enjoying packaged marshmallows.
Bronislav Robenek
Network Architect, Cloud4com
Great products. When you hold them in your hands, you see the care for qualitiy and product details. I strongly recommend Flexoptix' products.
Dariusz Siedlecki
Nettec
Since we ordered a FLEXBOX, our life as definitly changed.
There’s a before and an after FLEXBOX.
So many vendors in the compatibility matrice, so easy way to configure the module!
And the cables and accessories came also with quality.
Stéphane Gouron
Directeur Agence Ouest, S-cube.