1G SFP BiDi ZX+ 120 km, ᵀˣ1510 / ᴿˣ1570 nm, DDM, LC-Simplex, Singlemode

Universal SFP BiDi Transceiver
Use FLEXBOX to configure to almost any vendor
Double your bandwith by using only one fiber for transmit and receive
For 1000BASE-ZX+ Ethernet links
Supported Data Rates: 125 Mbit/s - 1.25 Gbit/s
Up to 120 km via Singlemode OS2
LC-Simplex Connector
Digital Diagnocstic Monitoring (DDM)
Specs
  • 1510 nm
  • 120 km
  • 1.25 G
  • BiDi
Protocols
  • 100M ETH
  • 1G ETH
  • 1G FC
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
S.B1612.B.MPDL:Sx
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor SFP
Connector / Polish LC-Simplex UPC
Interface Singlemode BiDi
Type BiDi ZX+
Distance 120 km
Temperature Range 0°C - 70°C
Bandwidth 125 Mbit/s - 1.25 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1 W
CDR none
SGMII No
Inbuilt FEC No
Powerbudget (dB) 33 dB
Transmit min/max per lane 0 dBm / 5 dBm
Receiver min/max per lane -33 dBm / -8 dBm (overload)
Wavelength TX (Typical) 1510 nm
Wavelength TX (Range) 1504 - 1517.5 nm
Wavelength RX (Typical) 1570 nm
Wavelength RX (Range) 1550 - 1590 nm
Laser DFB
Receiver Type APD
Modulation NRZ
Transmit and Dispersion Penalty 1 dB
Extinction Ratio 9 dB
Supported Protocols 1G Fibre Channel, Fast Ethernet, Gigabit Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • A10networks # compatible
  • ADTRAN # compatible
  • ADVA # compatible
  • Allied Telesis # compatible
  • Arista 3rd_Party SFP-1G-LX compatible
  • Arista SFP-1G-LX compatible
  • Aruba Networks(ex. HP Network) J4859C compatible
  • Aruba Networks(ex. HP Network) J4860C compatible
  • Avaya (ex. Nortel) # compatible
  • Brocade E1MG-BXD compatible
  • Check Point # compatible
  • Ciena (ex. Nortel) # compatible
  • Cisco Systems GLC-BX80-D-I compatible
  • D-LINK # compatible
  • Dell # compatible
  • Dell (ex. Force10) # compatible
  • Edge Core ET4203-BX20 compatible
  • Ericsson # compatible
  • Extreme # compatible
  • Extreme (ex. Enterasys) # compatible
  • F5 Networks # compatible
  • FibroLAN # compatible
  • Fluke Networks # compatible
  • Fortinet # compatible
  • Fujitsu # compatible
  • H3C (ex. 3COM) # compatible
  • Hirschmann # compatible
  • HP H3C # compatible
  • Huawei # compatible
  • Infinera (ex. Transmode) # compatible
  • Intel # compatible
  • Juniper (ex BTI Systems) # compatible
  • Juniper SFP-1GE-LH compatible
  • Keymile # compatible
  • KTI Networks # compatible
  • LANCOM # compatible
  • Lenovo (ex. Blade Network) # compatible
  • LevelOne # compatible
  • Lynx # compatible
  • MikroTik # compatible
  • Motorola # compatible
  • Moxa # compatible
  • MRV # compatible
  • Netgear # compatible
  • Nokia (ex. Alcatel-Lucent) # compatible
  • Nokia Siemens Networks # compatible
  • Nvidia (ex. Mellanox) # compatible
  • Palo Alto Networks # compatible
  • Quanta # compatible
  • Radware # compatible
  • Ribbon (ex. ECI) # compatible
  • TP-LINK # compatible
  • Transition Networks # compatible
  • Ubiquiti Networks # compatible
  • Waystream (ex. Packetfront) # compatible
  • Zyxel # compatible
Your vendor / compatibility is missing?

What customers say

Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well. Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play. If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before. Thanks for the brilliant service!
Gerald Buchholz / Principal Solution Architect Aviatrix
Before we knew FLEXOPTIX, we always stocked various types of transceivers from different brands. Now, several years later, we have completely switched to FLEXOPTIX's universal transceivers since we can simply brand these ourselves using the FLEXBOX. Along with their broad product range and very fast shipping, they are an awesome company to deal with!
Jeffrey Bosma XS News , Sr. System & Network Engineer
FLEXBOX makes it easier than ever to manage your optics hardware! From unboxing to a configured module in a minute! Great product.
Otto Lodewijk Director, SuitIT
Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day. With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably. Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver. We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field. Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.
Christophe Mulkers CEO/CTO, Oufti Connections
More