1G SFP BiDi EX Extended 40 km, ᵀˣ1310 / ᴿˣ1490 nm, DDM, LC-Simplex, Singlemode

Universal SFP BiDi Transceiver
Use FLEXBOX to configure to almost any vendor
Double your bandwith by using only one fiber for transmit and receive
For 1000BASE-EX Ethernet links
Supported Data Rates: 125 Mbit/s - 1.25 Gbit/s
Up to 40 km via Singlemode OS2
LC-Simplex Connector
Operating Temperature from -20°C to 85°C, Digital Diagnocstic Monitoring (DDM)
Specs
  • 1310 nm
  • 40 km
  • 1.25 G
  • Extended
Protocols
  • 100M ETH
  • 1G ETH
  • 1G FC
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
S.B1612.40.CLDIL:Sx
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor SFP
Connector / Polish LC-Simplex UPC
Interface Singlemode BiDi
Type BiDi EX
Distance 40 km
Temperature Range -20°C - 85°C
Bandwidth 125 Mbit/s - 1.25 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1 W
CDR none
SGMII No
Inbuilt FEC No
Powerbudget (dB) 18 dB
Transmit min/max per lane -5 dBm / 0 dBm
Receiver min/max per lane -23 dBm / -3 dBm (overload)
Wavelength TX (Typical) 1310 nm
Wavelength TX (Range) 1303.5 - 1317 nm
Wavelength RX (Typical) 1490 nm
Wavelength RX (Range) 1470 - 1510 nm
Laser DFB
Receiver Type PIN
Modulation NRZ
Extinction Ratio 9 dB
Supported Protocols 1G Fibre Channel, Fast Ethernet, Gigabit Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • ADTRAN 1200487G40 compatible
  • ADTRAN 1442140G2 compatible
  • barox AC-SFP-BIA-LXE compatible
  • Brocade / Ruckus E1MG-BXU compatible
  • Calix 100-01670 compatible
  • Ciena (ex. Nortel) NTTP58CFE6 compatible
  • Cisco Systems GLC-BX40-U-I compatible
  • Coriant (ex. Tellabs) 81.S1GBEBX1133S compatible
  • Dell (ex. Force10) GP-SFP2-1Y-BXU compatible
  • Extreme 10053 compatible
  • Extreme 10057H compatible
  • Huawei SFP-GE-LX-SM1310-BIDI compatible
  • Perle PSFP-1000D-S1LC40U compatible
  • RAD SFP-21A compatible
  • Westermo 1100-0567 compatible
Your vendor / compatibility is missing?

What customers say

Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well. Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play. If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before. Thanks for the brilliant service!
Gerald Buchholz / Principal Solution Architect Aviatrix
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore. The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that. As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren Technical Consultant, IP Visie Networking B.V.

I personally did not know FLEXOPTIX yet, but since I got in contact with it the first time, I do not want to miss it anymore. Very good product. I like the ability to program them to vendor specific SFPs which are recognized as they would be original ones. If the hardware behind changes I can simply change the SFPs to new vendor specific ones.

Thank you for such a great product.

Stefan Kirbes System Administrator / INTERCOM Austria GmbH

The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.

Looking forward to keep using the flexbox in the future! :)

Stan van de Klippe Chief Executive Officer-royalehosting.net
More