1G SFP BiDi ZX+ Extended 120 km, ᵀˣ1510 / ᴿˣ1570 nm, DDM, SC-Simplex, Singlemode

Universal SFP BiDi Transceiver
Use FLEXBOX to configure to almost any vendor
Double your bandwith by using only one fiber for transmit and receive
For 1000BASE-ZX+ Ethernet links
Supported Data Rates: 125 Mbit/s - 1.25 Gbit/s
Up to 120 km via Singlemode OS2
SC-Simplex Connector
Operating Temperature from -20°C to 85°C, Digital Diagnocstic Monitoring (DDM)
Specs
  • 1510 nm
  • 120 km
  • 1.25 G
  • Extended
Protocols
  • 100M ETH
  • 1G ETH
  • 1G FC
Part number
S.B1612.B.MPDI
Availability
4-6 weeks after ordering
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor SFP
Connector / Polish SC-Simplex PC
Interface Singlemode BiDi
Type BiDi ZX+
Distance 120 km
Temperature Range -20°C - 85°C
Bandwidth 125 Mbit/s - 1.25 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1 W
CDR none
SGMII No
Inbuilt FEC No
Powerbudget (dB) 33 dB
Transmit min/max per lane 0 dBm / 5 dBm
Receiver min/max per lane -33 dBm / -8 dBm (overload)
Wavelength TX (Typical) 1510 nm
Wavelength TX (Range) 1504 - 1517.5 nm
Wavelength RX (Typical) 1570 nm
Wavelength RX (Range) 1550 - 1590 nm
Laser DFB
Receiver Type APD
Modulation NRZ
Transmit and Dispersion Penalty 1 dB
Extinction Ratio 9 dB
Supported Protocols 1G Fibre Channel, Fast Ethernet, Gigabit Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Arista Networks SFP-1G-LX compatible
  • Cisco Systems GLC-BX80-U-I compatible
Your vendor / compatibility is missing?

What customers say

In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
Erwin ter Hofstede CEO, EC-Hosting
Just wanted to express my giddy happiness at how fast your crack team of ninjas were able to get optics to my desk.
Donal Cunningham Senior Network Engineer - Airspeed Telecom
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore. The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that. As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren Technical Consultant, IP Visie Networking B.V.
Your FLEXBOX rocks. On our Linux workstations we can easily change the vendor and thus save costs. In addition, we are also convinced by the product quality, the support and the handling of the order. Thank you!
Martin Verges Managing director, croit GmbH
More