1G SFP BiDi LX 3 km, ᵀˣ1550 / ᴿˣ1310 nm, DDM, SC-Simplex, Singlemode
- 1550 nm
- 3 km
- 1.25 G
- BiDi
- 100M ETH
- 1G ETH
- 1G FC
Just go to cart and click CREATE QUOTE.
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | SC-Simplex PC |
| Interface | Singlemode BiDi |
| Type | BiDi LX |
| Distance | 3 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 125 Mbit/s - 1.25 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
| Power Consumption | 1 W |
| CDR | none |
|---|---|
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 8 dB |
| Transmit min/max per lane | -14 dBm / -8 dBm |
| Receiver min/max per lane | -22 dBm / -3 dBm (overload) |
| Wavelength TX (Typical) | 1550 nm |
| Wavelength TX (Range) | 1480 - 1580 nm |
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1600 nm |
|---|---|
| Laser | FP |
| Receiver Type | PIN |
| Modulation | NRZ |
| Transmit and Dispersion Penalty | 1 dB |
| Extinction Ratio | 6 dB |
| Supported Protocols | 1G Fibre Channel, Fast Ethernet, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Aruba Networks(ex. HP Network) J4859C compatible
- Cisco Systems GLC-BX-D compatible
- Fortinet FG-TRAN-LX compatible
- Juniper EX-SFP-GE10KT15R13 compatible
- Netgear AGM732F compatible
- TP-LINK TL-SM311LS compatible
What customers say
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.
We use FLEXOPTIX modules for years with different networking hardware. Amazing and very stable products without any issues. Preparing a big network project with several switch vendors it was time to do the next step and order a FLEXBOX. Now we can be much more flexible that before and the provided tools are fast, stable, easy to use and as stable as all other FLEXOPTIX producs. All in all - highest recommendation!
The new FLEXOPTIX 400GBASE-ZR modules are lit. We’ve been running a few of them in production and they just work. Awesome support from FLEXOPTIX. Keep up the good work!