155M SFP STM-1 BiDi Industrial 10 km, ᵀˣ1310 / ᴿˣ1550 nm, DDM, SC-Simplex, Singlemode

Universal SONET / SDH SFP BiDi Transceiver
Use FLEXBOX to configure to almost any vendor
Double your bandwith by using only one fiber for transmit and receive
Capable of operating in SDH / SONET networks
Supported Data Rates: 125 Mbit/s - 155 Mbit/s
Up to 10 km via Singlemode OS2
SC-Simplex Connector
Operating Temperature from -40°C to 85°C, Digital Diagnocstic Monitoring (DDM)
Specs
  • 1310 nm
  • 10 km
  • 155 M
  • Industrial
Protocols
  • 100M ETH
  • STM-1
Part number
S.B1303.10.DI
Availability
4-6 weeks after ordering
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor SFP
Connector / Polish SC-Simplex PC
Interface Singlemode BiDi
Type BiDi STM-1
Distance 10 km
Temperature Range -40°C - 85°C
Bandwidth 125 Mbit/s - 155 Mbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 1 W
CDR none
SGMII No
Inbuilt FEC No
Powerbudget (dB) 10 dB
Transmit min/max per lane -15 dBm / -8 dBm
Receiver min/max per lane -25 dBm / -8 dBm (overload)
Wavelength TX (Typical) 1310 nm
Wavelength TX (Range) 1250 - 1350 nm
Wavelength RX (Typical) 1550 nm
Wavelength RX (Range) 1500 - 1600 nm
Laser FP
Receiver Type PIN
Modulation NRZ
Extinction Ratio 8.2 dB
Supported Protocols Fast Ethernet, STM-1

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Marconi SU66AE compatible
Your vendor / compatibility is missing?

What customers say

We will now be able to source all our SFPs from a single vendor without having to worry about the configuration. That translates to peace of mind and huge flexibility. Well done guys!
Gregory Agerba CTO, Neocarrier Communications
Have been using FLEXOPTIX transceivers for a few years now in a carrier/telecoms environment for various vendors and they've never disappointed me. After having the opportunity to be able to program them myself on demand, I've realized how many hours I could have saved until now with FLEXBOX! No large stocks, just a few generic SFPs in stock waiting to get programmed when needed. Awesome!
Michael Nicolaou Senior Network Consultant, CDMA Services Ltd
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the flexoptix robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Nick Derksen Infrastructure Engineer, Previder B.V
Very easy to use and quick too. I particularly like the ability to use the same configuration on a number of transceivers just by ticking a box - a real time saver
Mike Dallaway Mira 2014 Limited
More