1G SFP EX Industrial 40 km, λ1550 nm, DDM, LC-Duplex, Singlemode
- 1550 nm
- 40 km
- 1.25 G
- Industrial
- 1G ETH
- 1G FC
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | EX |
| Operating Temperature | Industrial |
| Modulation | NRZ |
| Distance | 40 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 1.25 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 1 W |
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 19 dB |
| Transmit min/max per lane | -5 dBm / 0 dBm |
| Receiver min/max per lane | -24 dBm / -3 dBm (overload) @1G |
| Wavelength TX (Typical) | 1550 nm |
| Wavelength TX (Range) | 1500 - 1580 nm |
|---|---|
| Wavelength RX (Typical) | 1550 nm |
| Wavelength RX (Range) | 1260 - 1600 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | NRZ @1G |
| Transmit and Dispersion Penalty | 1 dB |
| Extinction Ratio | 9 dB |
| Supported Protocols | 1G Fibre Channel, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ADVA 1061705851-02 compatible
- Ciena XCVR-040U55 compatible
- Cisco Systems GLC-EX-SMD compatible
- Juniper SFP-1GE-LH compatible
- Korenix SFPGXD50D-w compatible
- Moxa SFP-1GLHXLC-T compatible
- Nokia-Siemens (ex. Atrica) AT10027-ID-R compatible
- RAD SFP-7DH compatible
- Ribbon (ex. ECI) OTGBE_EX compatible
- Siemens 6GK5992-1AN00-8AA0 compatible
- Telco Systems BTI-MGBIC-GEX-DD-T-LC compatible
- Teleste MSG224A compatible
What customers say
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
The FLEXBOX has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The FLEXOPTIX universal transceivers are very easy to configure and we will be ordering these in the future.
The FLEXBOX is really a great tool. It allows me to quickly re-configure transceivers. Nice additional feature is the "Power Meter & Source" tool. It allows, without additional hardware, a quick check of optical transceivers, fiber cables, fiber connections etc.
The FLEXBOX has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the FLEXBOX was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the FLEXBOX in the future! :)