1G SFP LX Industrial 10 km, λ1310 nm, DDM, LC-Duplex, Singlemode
- 1310 nm
- 10 km
- 1.25 G
- Industrial
- 1G ETH
- 1G FC
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | LX |
| Operating Temperature | Industrial |
| Modulation | NRZ |
| Distance | 10 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 1.05 Gbit/s - 1.25 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 1 W |
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 9 dB |
| Transmit min/max per lane | -9 dBm / -3 dBm |
| Receiver min/max per lane | -18 dBm / -3 dBm (overload) @1G |
| Wavelength TX (Typical) | 1310 nm |
| Wavelength TX (Range) | 1260 - 1360 nm |
|---|---|
| Wavelength RX (Typical) | 1310 nm |
| Wavelength RX (Range) | 1260 - 1600 nm |
| Laser | FP |
| Receiver Type | PIN |
| Modulation | NRZ @1G |
| Extinction Ratio | 9 dB |
| Supported Protocols | 1G Fibre Channel, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- ABB 3BSE080219R1 compatible
- ADTRAN 1184561PG1 compatible
- ADVA 1061705850-02 compatible
- Alcatel-Lucent Ent. ISFP-GIG-LX compatible
- Allied Telesis AT-SPLX10/I compatible
- Allnet ALL4751-INDU compatible
- Arista 3rd_Party SFP-1G-LX compatible
- Arista SFP-1G-LX compatible
- Aruba Networks(ex. HP Network) J4859C compatible
- Aruba Networks(ex. HP Network) J4859D compatible
- Axis T8611 compatible
- barox AC-SFP-LX-E-10 compatible
- Blackbox LFP413 compatible
- Broadcom SFP LX compatible
- Brocade / Ruckus E1MG-LX-OM compatible
- Brocade E1MG-LX-OM compatible
- Calix 100-01662 compatible
- Cambium Networks SFP-1G-LX compatible
- Ceragon SFP-GE-LX-EXT-TEMP compatible
- Ciena XCVR-010Y31 compatible
- Ciena XCVR-A10Y31 compatible
- Cisco (ex. Meraki) MA-SFP-1GB-LX10 compatible
- Cisco Systems (ex. Linksys) MGBLX1 compatible
- Cisco Systems GLC-LH-SMD compatible
- Cisco Systems GLC-LX-SM-RGD compatible
- Cisco Systems SFP-GE-L compatible
- ComNet SFP-6 compatible
- CTC Union ISFP-S7020-31-D compatible
- D-LINK DEM-310GT compatible
- Dell 320-2879 compatible
- Dell 331-5309 compatible
- Dell 407-BBOO compatible
- Digitus DN-81011 compatible
- Extreme (ex. Enterasys) I-MGBIC-GLX compatible
- Extreme 10052H compatible
- FibroLAN SF1G-LX1 compatible
- Fortinet FN-TRAN-LX compatible
- Fortinet FR-TRAN-LX compatible
- Guntermann & Drunck SFP-LXI compatible
- Hirschmann M-SFP-LX/LC EEC compatible
- HP H3C JD119B compatible
- Huawei eSFP-GE-LX-SM1310 compatible
- Huawei LTD1302-BH+1 compatible
- Infinera (ex. Transmode) TRX100075 compatible
- Intel SFP LX compatible
- Juniper EX-SFP-1GE-LX compatible
- Juniper QFX-SFP-1GE-LX compatible
- Juniper SFP-1GE-LX compatible
- Juniper SRX-SFP-1GE-LX-ET compatible
- Keymile 37973010 compatible
- Korenix SFPGLX10D-w compatible
- KTI Networks SFP-GLS-10A-A compatible
- kvm-tec KT-7010 compatible
- LANCOM SFP-LX-LC1 compatible
- Lantronix TN-SFP-LX1T compatible
- LevelOne SFP-4210 compatible
- MikroTik S-31DLC20D compatible
- Moxa SFP-1GLXLC-T compatible
- Net Insight NPA0012-L101 compatible
- Nexans 88645870 compatible
- Nexans 88646016 compatible
- Nokia (ex. Alcatel-Lucent) 1AB376720002 compatible
- Nokia (ex. Alcatel-Lucent) 3FE25774AA01 compatible
- Nokia (ex. Alcatel-Lucent) 3HE00028CA compatible
- Nokia Networks FOSC 471880A.101 compatible
- Nokia-Siemens (ex. Atrica) AT10006-ID-R compatible
- OpenGear 569025 compatible
- Overture 3000-167 compatible
- Packetlight SL6 compatible
- Palo Alto Networks PAN-SFP-LX compatible
- Perle PSFP-1000D-S2LC10-XT compatible
- Phoenix Contact FL SFP LX10-B compatible
- Planet MGB-TLX compatible
- RAD SFP-6DH compatible
- Radware 9062066 compatible
- Redlion NTSFP-LX-10 compatible
- Ribbon (ex. ECI) OTGBE-LX compatible
- Rockwell 1783-SFP1GLX compatible
- SAF Tehnika I0AOM001 compatible
- Siemens 6GK5992-1AM00-8AA0 compatible
- Siemens SFP992-1LD compatible
- Sophos ITFZTCHLX compatible
- Telco Systems BTI-MGBIC-GLX-DD-T-LC compatible
- Teleste MSG211A compatible
- Teleste MWG211A compatible
- TP-LINK TL-SM311LS compatible
- Transition Networks TN-SFP-LX compatible
- Ubiquiti Networks SFP LX compatible
- Wago 852-1210 compatible
- Westermo 1100-0541 compatible
- Zyxel SFP-LX-10-D compatible
What customers say
We will now be able to source all our SFPs from a single vendor without having to worry about the configuration. That translates to peace of mind and huge flexibility. Well done guys!
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the FLEXOPTIX robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
First of all, I must salute the both geniously clever and absolutely gorgeous packaging: frankly, my I.T. colleague and I had blinking stars in the eyes when opening the boxes. I had a previous experience with both proprietary and generic transceivers/DAC, and I must admit that your hardware is doing great, everything feels very professional, and thanks to the FLEXBOX, the configuration is super-easy, install the app, insert the transceiver, select model, et voilà! The switches are happy. Thanks for the candy!
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!