100G QSFP28 SR4 with dual CDR 100 m, 4x λ850 nm, MTP/MPO-8/12, Multimode

Universal QSFP28 Transceiver
Use FLEXBOX to configure to almost any vendor
For 100GBASE-SR4 Ethernet links
Integrated Clock-Data-Recovery (CDR)
Supported Data Rates: 103.12 Gbit/s (4x 25.78 Gbit/s)
Up to 100 m via Multimode OM4
MTP/MPO-8/12 Connector
Specs
  • 4x 850 nm
  • 100 m
  • 103.12 G
  • MTP/MPO-8/12
Protocols
  • 100G ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
Q.851HG.02:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

  • Matching Products

Higher Power Budget
100G QSFP28 ESR4 with dual CDR 300 m, 4x λ850 nm, MTP/MPO-8/12, Multimode 
100G QSFP28 ESR4 with dual CDR | 300 m, 4x λ850 nm, MTP/MPO-8/12, Multimode
0 pcs in stock 246.88 EUR
25G SFP28 SR with dual CDR 100 m, λ850 nm, LC-Duplex, Multimode 
25G SFP28 SR with dual CDR | 100 m, λ850 nm, LC-Duplex, Multimode
16520 pcs in stock As low as 62.54 EUR
MTP® to MTP® Multimode OM4 cable 8 Cores, MPO compliant, 50/125 µm, purple, 0.5 m - 100 m 
MTP® to MTP® Multimode OM4 cable | 8 Cores, MPO compliant, 50/125 µm, purple, 0.5 m - 100 m
As low as 101.59 EUR
MTP® to 4x LC-Duplex Multimode OM4 Breakout cable 8 Cores, MPO compliant, 50/125 µm, purple, 0.5 m - 100 m 
MTP® to 4x LC-Duplex Multimode OM4 Breakout cable | 8 Cores, MPO compliant, 50/125 µm, purple, 0.5 m - 100 m
As low as 114.99 EUR

Specification

Form Factor QSFP28
Connector / Polish MTP/MPO-8/12 PC
Interface Multimode
Compliance Code SR4
Distance 100 m
Temperature Range 0°C - 70°C
Lane Count 4x (Tx/Rx)
Bandwidth 103.12 Gbit/s
Bandwith Per Lane 25.78 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 3.5 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 1.2 dB
Transmit min/max per lane -9.1 dBm / 2.4 dBm
Receiver min/max per lane -10.3 dBm / 2.4 dBm (overload) @100G
Wavelength TX (Typical) 4x 850 nm
Wavelength TX (Range) 840 - 860 nm
Wavelength RX (Typical) 4x 850 nm
Laser VCSEL
Receiver Type PIN
Modulation NRZ @100G
Extinction Ratio 2 dB
Supported Protocols 100G Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • Arista 3rd_Party QSFP-100G-SR4 compatible
  • Arista QSFP-100G-SR4 compatible
  • Aruba Networks(ex. HP Network) JL309A compatible
  • Avaya (ex. Nortel) AA1405005-E6 compatible
  • Broadcom AFBR-89CDHZ compatible
  • Brocade / Ruckus E100G-QSFP28-SR4 compatible
  • Brocade 100G-QSFP28-SR4 compatible
  • Check Point CPAC-TR-100SR compatible
  • Chelsio SM100G-SR compatible
  • Ciena 160-9400-900 compatible
  • Cisco Systems QSFP-100G-SR4-S compatible
  • Cumulus Networks QSFP28 SR4 compatible
  • Dell 407-BBSM compatible
  • Dell QSFP28-100G-SR4 compatible
  • Edge Core ET7402-SR4 compatible
  • Evertz QSFP-25G-MM-M compatible
  • Extreme 100G-SR4-QSFP100M compatible
  • Extreme 10401 compatible
  • F5 Networks OPT-0031-01 compatible
  • Fortinet FG-TRAN-QSFP28-SR4 compatible
  • Gigamon Q28-502 compatible
  • HP H3C JL275A compatible
  • Huawei QSFP-100G-SR4 compatible
  • Infinera (ex. Coriant) ZXS-Q8AOCZDR-01 compatible
  • Infinera TOM-100G-Q-SR4 compatible
  • Juniper JNP-QSFP-100G-SR4 compatible
  • Juniper QSFP-100G-SR4-T2 compatible
  • Juniper QSFP-100GBASE-SR4 compatible
  • Kemp Technologies LM-QSFP28-100G-SR compatible
  • Keysight (ex. Ixia) QSFP28-SR4-XCVR compatible
  • Lenovo 7G17A03539 compatible
  • MikroTik XQ+85MP01D compatible
  • NetApp X65405 compatible
  • Netgear ACM761 compatible
  • Netscout 321-2133 compatible
  • Nokia (ex. Alcatel-Lucent) 1AB474800004 compatible
  • Nokia (ex. Alcatel-Lucent) 3AL82099AA compatible
  • Nokia (ex. Alcatel-Lucent) 3HE10551AA compatible
  • NoviFlow 400000511 compatible
  • Nvidia (ex. Mellanox) MMA1B00-C100D compatible
  • Palo Alto Networks PAN-QSFP28-100GBASE-SR4 compatible
  • Planet QSFP-100G-SR4 compatible
  • Pure Storage QSFP28-100G-SR4 compatible
  • RAD QSFP28-2D compatible
  • Radware 9062236 compatible
  • Ribbon (ex. ECI) OTR100Q28_SR4DR compatible
  • SonicWALL 02-SSC-5806 compatible
  • Spirent ACC-6065A compatible
  • Viavi (ex. JDSU) QSFP28 SR4 compatible
  • Alcatel-Lucent Ent. QSFP-100G-SR4 compatible
Your vendor / compatibility is missing?

What customers say

Using FLEXBOX we have been able to deliver high quality optical adapter product range in a mixed brand environment, with the maximum flexibility in managing logistic and stock costs. It is a definitely a tool that every professional should use.
Laert Klemo CTO, Eagle Security System
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore. The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that. As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Thomas Verschuren Technical Consultant, IP Visie Networking B.V.
The FLEXBOX allows us to use 100MBit/s to multi-gigabit transceivers in our product for a wide range of customer needs. We can not solve them without this magic box!
Klaus Degner Managing Director, Allegro Packets GmbH
Have been using FLEXOPTIX transceivers for a few years now in a carrier/telecoms environment for various vendors and they've never disappointed me. After having the opportunity to be able to program them myself on demand, I've realized how many hours I could have saved until now with FLEXBOX! No large stocks, just a few generic SFPs in stock waiting to get programmed when needed. Awesome!
Michael Nicolaou Senior Network Consultant, CDMA Services Ltd
More