100G QSFP28 ER4 Lite with dual CDR 30 km, λ1296-1309 nm, LC-Duplex, Singlemode
- int. Mux
- 30 km
- 103.12 G
- LC
- 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | QSFP28 |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | ER4 Lite |
| Distance | 30 km |
| Temperature Range | 0°C - 70°C |
| Lane Count | 4x (Tx/Rx) |
| Bandwidth | 103.12 Gbit/s |
| Bandwith Per Lane | 25.78 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 5 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 15.6 dB |
| Transmit min/max per lane | -2.9 dBm / 4.5 dBm |
| Receiver min/max per lane | -18.5 dBm / -7 dBm (overload) @100G |
| Wavelength TX (Typical) | 1295.56 nm, 1300.05 nm, 1304.58 nm, 1309.14 nm |
| Wavelength RX (Typical) | 1295.56 nm, 1300.05 nm, 1304.58 nm, 1309.14 nm |
|---|---|
| Laser | EML |
| Receiver Type | APD |
| Modulation | NRZ @100G |
| Transmit and Dispersion Penalty | 2.5 dB |
| Extinction Ratio | 7 dB |
| Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Arista 3rd_Party QSFP-100G-ERL4 compatible
- Arista QSFP-100G-ERL4 compatible
- Aruba Networks(ex. HP Network) JL310A compatible
- Avaya (ex. Nortel) AA1405001-E6 compatible
- Ciena 160-9405-900 compatible
- Cisco Systems QSFP-100G-ER4L-S compatible
- Cisco Systems QSFP-100G-LR4-S compatible
- Cumulus Networks QSFP28 ER4 compatible
- Dell QSFP28-100G-LR4 compatible
- Edge Core QSFP28 LR4 compatible
- Extreme 100G-LR4-QSFP10KM compatible
- Extreme 10403 compatible
- Huawei QSFP28 LR4 compatible
- Infinera (ex. Coriant) ZXS-Q8L4ZZZZ-00 compatible
- Infinera TOM-100G-Q-LR4 compatible
- IP Infusion QSFP28 ER4 compatible
- Juniper QSFP-100G-ER4L compatible
- Net Insight NPA0144-ER4L compatible
- Nokia (ex. Alcatel-Lucent) 3AL82152AA compatible
- Nokia (ex. Alcatel-Lucent) 3HE10550AA compatible
- Nokia (ex. Alcatel-Lucent) 3HE11239AA compatible
- Palo Alto Networks PAN-QSFP28-100GBASE-ER4 compatible
What customers say
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.
First of all, I must salute the both geniously clever and absolutely gorgeous packaging: frankly, my I.T. colleague and I had blinking stars in the eyes when opening the boxes. I had a previous experience with both proprietary and generic transceivers/DAC, and I must admit that your hardware is doing great, everything feels very professional, and thanks to the FLEXBOX, the configuration is super-easy, install the app, insert the transceiver, select model, et voilà! The switches are happy. Thanks for the candy!