40G QSFP+ ESR4 300 m, 4x λ850 nm, MTP/MPO-8/12, Multimode
QSFP+
ESR4
Universal QSFP+ Transceiver
Use FLEXBOX to configure to almost any vendor
For 40GBASE-ESR4 Ethernet links
Supported Data Rates: 41.2 Gbit/s (4x 10.3 Gbit/s)
Up to 300 m via Multimode OM3
MTP/MPO-8/12 Connector
Specs
- 4x 850 nm
- 300 m
- 41.2 G
- MTP/MPO-8/12
Protocols
- 10G ETH
- 40G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | QSFP+ |
|---|---|
| Connector / Polish | MTP/MPO-8/12 PC |
| Interface | Multimode |
| Compliance Code | ESR4 |
| Distance | 300 m |
| Temperature Range | 0°C - 70°C |
| Lane Count | 4x (Tx/Rx) |
| Bandwidth | 41.2 Gbit/s |
| Bandwith Per Lane | 10.3 Gbit/s |
| Digital Diagnostic Management (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 1.5 W |
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 1.9 dB |
| Transmit min/max per lane | -7.6 dBm / 2.4 dBm |
| Receiver min/max per lane | -9.5 dBm / 3.4 dBm (overload) @40G |
| Wavelength TX (Typical) | 4x 850 nm |
| Wavelength TX (Range) | 840 - 860 nm |
|---|---|
| Wavelength RX (Typical) | 4x 850 nm |
| Laser | VCSEL |
| Receiver Type | PIN |
| Modulation | NRZ @40G |
| Extinction Ratio | 3 dB |
| Supported Protocols | 40G Ethernet, 10G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- A10networks # 13026 compatible
- Alcatel-Lucent Ent. QSFP-40G-SR compatible
- Alcatel-Lucent Ent. QSFP-4X10G-SR compatible
- Allied Telesis AT-QSFPSR4 compatible
- Arista 3rd_Party QSFP-40G-XSR4 compatible
- Arista QSFP-40G-XSR4 compatible
- Aruba Networks(ex. HP Network) JH233A compatible
- Avaya (ex. Nortel) AA1404006-E6 compatible
- Brocade 40G-QSFP-eSR4 compatible
- Brocade 40G-QSFP-SR4-INT compatible
- Chelsio # 13027 compatible
- Cisco Systems QSFP-40G-CSR4 compatible
- Dell (ex. Force10) GP-QSFP-40GE-1SR compatible
- Dell 407-11161 compatible
- Dell 407-BBSK compatible
- Extreme (ex. Enterasys) 40GB-SR4-QSFP compatible
- Extreme 10319 compatible
- Huawei QSFP-40G-eiSR4 compatible
- Intel E40GQSFPSR compatible
- Juniper QFX-QSFP-40GE-ESR4 compatible
- Keysight (ex. Ixia) QMM850-PLUS compatible
- Lenovo (ex. Blade Network) 00FE325 compatible
- MRV # 13036 compatible
- NetOptics QSFP+KT-50SR4 compatible
- Nokia Networks AOMB 474899A.101 compatible
- Nvidia (ex. Mellanox) MC2210411-SR4E compatible
- Oracle X2124A-N compatible
- Packetlight QSFP+-SR-1102 compatible
- Palo Alto Networks QSFP+ ESR4 compatible
- Quanta # 13038 compatible
- Radware # 13039 compatible
- Solarflare SFM40G-SR4 compatible
Your vendor / compatibility is missing?
What customers say
The flexbox has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the flexbox was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the flexbox in the future! :)
Stan van de Klippe
Chief Executive Officer-royalehosting.net
On more than one occasion the flexbox significantly saved time for me by not having to scrub a deployment session but simply reconfigure a transceiver and carry on. This alone is a good reason that secures the flexbox a non-negotiable place in my datacenter-go-bag. However what really sets flexoptix apart is not them solving an irritating problem we all know. No. It is their vast inventory and know-how paired with impeccable QA. If I have a need for transceivers it is my single go-to source for procurement. They have exactly what I need in stock even before I know I need it, and when I need it, I can trust the order is in my hands in no time. Every single time. I can configure and deploy without doubt and without delay. It is rare to find such a valuable and dependable partner that reliably takes away a whole set of problems while offering decent pricing and a customer support that is above reproach.
Michael Horn
Telecommunications Infrastructure Security Professional
Spending a few minutes of my time, first and foremost expressing how much I’m impressed by your friendliness, is the least I can do. Friendliness was followed by super-fast order processing and delivery. In a few words, unboxing and using your Flexbox is an utterly awesome experience. As in brilliant. Also saving us loads of time ordering optics. In addition to all of this – you deliver particular good build quality, too. You’ve got me impressed, thank you!
Mark van den Berg
CTO - Icera Networks
I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.
Denis Kempeneers
Network Consultant-globalnetwork.tech