100G QSFP28 BiDi ZR with dual CDR 80 km, LC-Simplex, Singlemode
- int. Mux
- 80 km
- 103.12 G
- LC
- 100G ETH
Specification
| Form Factor | QSFP28 |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi ZR |
| Operating Temperature | Standard |
| Modulation | PAM4 |
| Distance | 80 km |
| Temperature Range | 0°C - 70°C |
| Lane Count | 4x (Tx/Rx) |
| Bandwidth | 103.12 Gbit/s |
|---|---|
| Bandwidth Per Lane | 25.78 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 5.5 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 28 dB |
| Transmit min/max per lane | 1 dBm / 7 dBm |
| Receiver min/max per lane | -27 dBm / -6 dBm (overload) @100G |
|---|---|
| Wavelength TX (Typical) | 1273.5 nm, 1277.9 nm, 1282.3 nm, 1286.7 nm |
| Wavelength RX (Typical) | 1295.6 nm, 1300 nm, 1304.6 nm, 1309.1 nm |
| Laser | EML |
| Receiver Type | SOA + PIN |
| Modulation | PAM4 @100G |
| Extinction Ratio | 6 dB |
| Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.
Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day.
With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably.
Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver.
We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field.
Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.
The SFP are exactly like promise on the web page, and the configuration tool is so amazing. I worked years with SFP and optical fiber and this tool is so great. It include a power meter an OTDR and allow to diagnose and configure the SFP for many vendors. It will help us in our research and also to manage our LAN. Thank you FLEXOPTIX
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the FLEXOPTIX robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!