100G QSFP28 BiDi LR Industrial with dual CDR 20 km, ᵀˣ1311 / ᴿˣ1291 nm, LC-Simplex, Singlemode
QSFP28
BiDi LR
Universal QSFP28 BiDi Transceiver
Use FLEXBOX to configure to almost any vendor
Double your bandwith by using only one fiber for transmit and receive
For 100GBASE-LR Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 106.25 Gbit/s
Up to 20 km via Singlemode OS2
LC-Simplex Connector
Operating Temperature from -40°C to 85°C
Specs
- 1311 nm
- 20 km
- 106.25 G
- LC
Protocols
- 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | QSFP28 |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi LR |
| Operating Temperature | Industrial |
| Distance | 20 km |
| Temperature Range | -40°C - 85°C |
| Bandwidth | 106.25 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 4.5 W |
|---|---|
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 7.4 dB |
| Transmit min/max per lane | -0.2 dBm / 6.6 dBm |
| Receiver min/max per lane | -7.6 dBm / 6.6 dBm (overload) @100G |
| Wavelength TX (Typical) | 1311 nm |
| Wavelength TX (Range) | 1304.5 - 1317.5 nm |
| Wavelength RX (Typical) | 1291 nm |
|---|---|
| Wavelength RX (Range) | 1284.5 - 1297.5 nm |
| Laser | EML |
| Receiver Type | PIN |
| Modulation | PAM4 @100G |
| Transmit and Dispersion Penalty | 3.6 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
Insert into the FLEXBOX
Select and Configure
Use with Device
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems QSFP-100G-LR-S compatible
Your vendor / compatibility is missing?
What customers say
The flashing is very quick and you can configure it to flash multiple devices in a row. Definitely well worth it.
Adam Montgomery
Co-Founder/ Necto Inc
We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!
Stefan van Merriënboer
Senior ICT Consultant / Effisol
FLEXBOX makes it easier than ever to manage your optics hardware! From unboxing to a configured module in a minute! Great product.
Otto Lodewijk
Director / SuitIT
The FLEXBOX is the best thing since sliced bread!
Stefan Ideler
CTO / i3D.net