100G QSFP28 BiDi LR with dual CDR 20 km, ᵀˣ1311 / ᴿˣ1291 nm, LC-Simplex, Singlemode
- 1311 nm
- 20 km
- 106.25 G
- LC
- 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | QSFP28 |
|---|---|
| Connector / Polish | LC-Simplex UPC |
| Interface | Singlemode BiDi |
| Compliance Code | BiDi LR |
| Operating Temperature | Standard |
| Distance | 20 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 106.25 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 4.5 W |
|---|---|
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 7.4 dB |
| Transmit min/max per lane | -0.2 dBm / 6.6 dBm |
| Receiver min/max per lane | -7.6 dBm / 6.6 dBm (overload) @100G |
| Wavelength TX (Typical) | 1311 nm |
| Wavelength TX (Range) | 1304.5 - 1317.5 nm |
| Wavelength RX (Typical) | 1291 nm |
|---|---|
| Wavelength RX (Range) | 1284.5 - 1297.5 nm |
| Laser | EML |
| Receiver Type | PIN |
| Modulation | PAM4 @100G |
| Transmit and Dispersion Penalty | 3.6 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Arista 3rd_Party QSFP-100G-LR4 compatible
- Cisco Systems QSFP-100G-LR-S compatible
- Huawei 10km_BiDi_LR4 compatible
- Juniper JNP-QSFP-100G-LR4 compatible
- Juniper QSFP-100G-LR compatible
- Nokia (ex. Alcatel-Lucent) 3HE16557AA compatible
What customers say
We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!
FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.
After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
Your FLEXBOX rocks. On our Linux workstations we can easily change the vendor and thus save costs. In addition, we are also convinced by the product quality, the support and the handling of the order. Thank you!