40G QSFP+ CWDM LR with FEC ~10 km / 9 dB, 1270 nm - 1330 nm, LC-Duplex
Universal QSFP+ Transceiver - CWDM
Use FLEXBOX to configure to almost any vendor
CWDM for multiple applications over one duplex fiber
For 40GBASE-LR Ethernet links
PAM4 modulated signal
Supported Data Rates: 42.5 Gbit/s
Powerbudget of 9 dB for up to 10 km using an OS2 ITU-T G.652 fiber
Specs
- CWDM
- ~10 km / 9 dB
- 42.5 G
Protocols
- 40G ETH
Part number
Q.16S40G.10.x
Your price
As low as
1,746.10 EUR
List price
Your price
As low as
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.
Just go to cart and click CREATE QUOTE.
Specification
Form Factor | QSFP+ |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | CWDM |
Type | CWDM LR |
Distance | 10 km |
Temperature Range | 0°C - 70°C |
Bandwidth | 42.5 Gbit/s |
Digital Diagnostic Management (DDM) | Internally Calibrated |
---|---|
Power Consumption | 3.5 W |
CDR | none |
Inbuilt FEC | Yes |
Powerbudget (dB) | 9 dB |
Transmit min/max per lane | -1 dBm / 4 dBm |
Receiver min/max per lane | -10 dBm / 4 dBm (overload) |
Wavelength TX (Typical) | Channel D - 1330 nm |
---|---|
Wavelength RX (Range) | 1260 - 1570 nm |
Laser | DFB |
Receiver Type | PIN |
Modulation | PAM4 |
Supported Protocols | 40G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems QSFP-40G-LR4-S compatible
- Extreme 10320 compatible
- Juniper JNP-QSFP-40G-LR4 compatible
Your vendor / compatibility is missing?
What customers say
After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
Adil Demiri
CTO, SGN d.o.o.
We will now be able to source all our SFPs from a single vendor without having to worry about the configuration. That translates to peace of mind and huge flexibility. Well done guys!
Gregory Agerba
CTO, Neocarrier Communications
The FLEXBOX was easy to set up and use, and the programmable transceivers worked seamlessly in several different brand devices. This will make our spares much easier to manage.
Shaun James
Engineering Inspector, Tata Steel Strip Products UK
Absolutely Flawless! Ultrafast delivery and real plug & play from start to finish. Now we're able to react on needs much quicker thanks to the FLEXBOX.
Having Universal Transceiver on stock and instantly program them to customer's need is amazing.
Elmar Gruber
H82 medientechnik GmbH