100G QSFP28 OTU4 ZR4 with dual CDR 80 km, λ1296-1309 nm, LC-Duplex, Singlemode
calcPageSize())"
/>
- int. Mux
- 80 km
- 112.2 G
- LC
- 100G EDR
- OTU4
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | QSFP28 |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | ZR4 |
| Operating Temperature | Standard |
| Distance | 80 km |
| Temperature Range | 0°C - 70°C |
| Lane Count | 4x (Tx/Rx) |
| Bandwidth | 103.12 Gbit/s - 112.2 Gbit/s |
| Bandwidth Per Lane | 25.78 Gbit/s - 28.05 Gbit/s |
|---|---|
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 5.5 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 29 dB |
| Transmit min/max per lane | 1 dBm / 6.5 dBm |
| Receiver min/max per lane | -28 dBm / 6 dBm (overload) @100G |
| Wavelength TX (Typical) | 1295.6 nm, 1300 nm, 1304.6 nm, 1309.1 nm |
|---|---|
| Wavelength RX (Typical) | 1295.6 nm, 1300 nm, 1304.6 nm, 1309.1 nm |
| Laser | EML |
| Receiver Type | SOA + PIN |
| Modulation | NRZ @100G |
| Extinction Ratio | 6 dB |
| Supported Protocols | 100G Infiniband EDR, OTU4 |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
FLEXOPTIX creates overall great and reliable products. We need optics for multiple vendors and with the FLEXBOX we are able to simplify our spare part handling.
The best part of the FLEXBOX are the Linux drivers and therefore no need for any additional OS just for branding optics.
The FLEXBOX has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the FLEXBOX was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the FLEXBOX in the future! :)
Definitely, FLEXOPTIX will be my optics supplier from today. The ability to compatibilize optics across multiple vendors is going to save us from many headaches. The FLEXBOX is a must for any company using optical network equipment.
Everything is build for and runs in the cloud today, the Aviatrix Multicloud solution as well.
Still, we have customers asking for a highperformance encryption from “their” premises to the cloud and this is where our CloudN appliances come into play.
If customers ask us to support the installation of our appliances, we’ll do everything we can to help. And then it’s good to know that if you sneak into a datacenter, you can rely on FLEXOPTIX to even fulfil that connection(s) that are terminating on a device that was missing or has changed in the architecture you discussed before.
Thanks for the brilliant service!