100G QSFP28, 100 GHz Grid - C-Band DWDM ZR with dual CDR and FEC 2 km / 1 dB, LC-Duplex
- DWDM 100 GHz
- 100 km
- 106.25 G
- Dual CDR
- 100G ETH
Specification
| Form Factor | QSFP28 |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | DWDM |
| Compliance Code | DWDM ZR |
| Operating Temperature | Standard |
| Modulation | PAM4 |
| Distance | 100 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 106.25 Gbit/s |
|---|---|
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 5.5 W |
| CDR | TX and RX |
| Inbuilt FEC | Yes, KP4 |
| Powerbudget (dB) | 1 dB |
| Transmit min/max per lane | -7 dBm / 4 dBm |
| Receiver min/max per lane | -8 dBm / 5.5 dBm (overload) @100G |
| Wavelength TX (Typical) | Channel 60 - 1529.55 nm |
|---|---|
| Wavelength RX (Range) | 1528.8 - 1565.5 nm |
| Laser | DFB |
| Receiver Type | PIN |
| Modulation | PAM4 @100G |
| Chromatic Dispersion Tolerance | -40 ps/nm to 20 ps/nm @100G |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
What a great product! FLEXBOX is an incredible help to our organisation that has a zoo of vendors and manufacturers in our data center. It is super easy to use and we can rapidly get a transceiver ready for any of our hardware. Q: How to improve the experience of setting up transceivers in a multivendor environment? A: FLEXBOX.
FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.
The SFP are exactly like promise on the web page, and the configuration tool is so amazing. I worked years with SFP and optical fiber and this tool is so great. It include a power meter an OTDR and allow to diagnose and configure the SFP for many vendors. It will help us in our research and also to manage our LAN. Thank you FLEXOPTIX
I had the chance to flash my first transceiver with the FLEXBOX and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the FLEXBOX. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my FLEXBOX for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.