100G QSFP28 CWDM4 Industrial with dual CDR 2 km, λ1271-1331 nm, LC-Duplex, Singlemode
- int. Mux
- 2 km
- 103.12 G
- LC
- 100G ETH
-
Alternatives
-
Matching Products
Just go to cart and click CREATE QUOTE.
-
Alternatives
-
Matching Products
Specification
Form Factor | QSFP28 |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Singlemode |
Type | CWDM4 |
Distance | 2 km |
Temperature Range | -40°C - 85°C |
Lane Count | 4x (Tx/Rx) |
Bandwidth | 103.12 Gbit/s |
Bandwith Per Lane | 25.78 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 4.5 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 3.5 dB |
Transmit min/max per lane | -6.5 dBm / 2.5 dBm |
Receiver min/max per lane | -10 dBm / 2.5 dBm (overload) |
Wavelength TX (Typical) | 1271 nm, 1291 nm, 1311 nm, 1331 nm |
Wavelength RX (Typical) | 1271 nm, 1291 nm, 1311 nm, 1331 nm |
---|---|
Laser | DFB |
Receiver Type | PIN |
Modulation | NRZ |
Transmit and Dispersion Penalty | 3 dB |
Extinction Ratio | 3.5 dB |
Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems QSFP-100G-SM-SR compatible
- Nokia (ex. Alcatel-Lucent) 3HE10552AA compatible
What customers say
We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!
A must-have for every network engineer.
Never again will you have to stock different transceiver types for different vendors for the infrastructure you are using.
The setup of the FLEXBOX is very easy and self-explanatory. The configuration of the FLEXOPTIX universal transceivers is done in seconds and without any problems. Thanks to the smartphone app and the Mobility Pack, even on the go without having to lug around large equipment.
Ten out of ten, absolutely recommended!