25G SFP28 DAC Passive Copper Cable, 0.5 - 5 m
- Twinax
- 0.5m - 5m
- 25.78 G
- 10G ETH
- 25G ETH
Specification
| Compliance Code | DAC |
|---|---|
| Form Factor | SFP28 to SFP28 |
| Interface | Direct Attached Cable |
| Operating Temperature | Standard |
| Modulation | NRZ |
| Length | 3 m |
|---|---|
| Cable Diameter | 30 AWG |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 10.3 Gbit/s - 25.78 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | not implemented |
| Power Consumption | 2 W (1 W + 1 W) |
|---|---|
| CDR | none |
| Modulation | NRZ |
| Supported Protocols | 25G Ethernet, 10G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Alcatel-Lucent Ent. SFP-25G-C3M compatible
- Arista 3rd_Party CAB-S-S-25G-3M compatible
- Arista CAB-S-S-25G-3M compatible
- Aruba Networks(ex. HP Network) 844477-B21 compatible
- Aruba Networks(ex. HP Network) JL488A compatible
- Broadcom SFP28 DAC 3m compatible
- Chelsio TAPCABLE28-3M compatible
- Cisco Systems SFP-H25G-CU3M compatible
- Dell (ex. Force10) VXFJY compatible
- Dell 470-ACEU compatible
- Dell 470-ACEY compatible
- Extreme 10521 compatible
- Extreme 25G-SFP28-TWX-P-0101 compatible
- Fortinet FN-CABLE-SFP28-3 compatible
- HP Storage (B-Series) S0K91A compatible
- Huawei SFP-25G-CU3M compatible
- Intel SFP28-DAC-3m compatible
- Juniper JNP-SFP-25G-DAC-3M compatible
- LANCOM SFP-DAC25-1M compatible
- MikroTik XS+DA0003 compatible
- NetApp X66240A-3 compatible
- Netgear SFP28-DAC-3M compatible
- Nvidia (ex. Mellanox) MCP2M00-A003 compatible
- QNAP SFP28-DAC-QN-BL compatible
- Ubiquiti Networks UACC-DAC-SFP28-3M compatible
What customers say
I had the chance to flash my first transceiver with the FLEXBOX and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the FLEXBOX. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my FLEXBOX for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.
FLEXOPTIX have saved us from the misery and disappointment of searching in vain through our box of old, single-vendor transceivers when we need to connect up a device, only to find we don’t have a compatible module. Having the FLEXBOX and programmable transceivers in our toolbox means we’ve always got the right transceiver for any device. The icing on the cake is the mobility pack which allows you to program any transceivers, anywhere, any time, with just a mobile phone and the FLEXBOX . Absolutely brilliant and couldn't ask for more.
For years we struggled with hundreds of transceivers from different vendors but this is finally over!
With FLEXBOX we can easily reconfigure our transceivers which in the end saves a lot of time and money.
After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!