10G SFP+ DAC Passive Copper Cable, 0.5 - 10 m
Universal Direct Attached Cable (DAC), 0.5 - 10 m
Use FLEXBOX to configure to almost any vendor
SFP+ to SFP+
Supports Datarates from 1 to 10.5 Gbit/s
Modules are permanently attached to each end
Low power consumption < 0.5 W (less than 0.25 W per terminal)
Connect different host systems by configuring each side individually
Specs
- Twinax
- 0.5m - 10m
- 10.5 G
Protocols
- 10G ETH
- 1G ETH
- 1G FC
- 2G FC
- 4G FC
- 8G FC
Specification
Compliance Code | DAC |
---|---|
Form Factor | SFP+ to SFP+ |
Interface | Direct Attached Cable |
Length | 4 m |
Temperature Range | -5°C - 75°C |
---|---|
Bandwidth | 1 Gbit/s - 10.5 Gbit/s |
Digital Diagnostic Management (DDM) | not implemented |
Power Consumption | 0.5 W (0.25 W + 0.25 W) |
CDR | none |
---|---|
Modulation | NRZ |
Supported Protocols | 10G Ethernet, 1G Fibre Channel, 2G Fibre Channel, 4G Fibre Channel, 8G Fibre Channel, Gigabit Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use
1. Insert Into FLEXBOX
- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
2. Select And Configure
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
3. Use With Device
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Aruba Networks(ex. HP Network) J9150A compatible
- Broadcom DAC-4M compatible
- Ciena XCVR-S00Z85 compatible
- Cisco Systems SFP-H10GB-CU4M compatible
- Extreme 10304 compatible
- Forcepoint MOD-SFP-10G-LR compatible
- Juniper EX-SFP-10GE-DAC-3M compatible
- Luminex DAC-4M compatible
- Net Insight NPA0077-SRD1 compatible
- TP-LINK TL-SM5220-3M compatible
Your vendor / compatibility is missing?
What customers say
Your FLEXBOX rocks. On our Linux workstations we can easily change the vendor and thus save costs. In addition, we are also convinced by the product quality, the support and the handling of the order. Thank you!
Martin Verges
Managing director, croit GmbH
Using FLEXBOX we have been able to deliver high quality optical adapter product range in a mixed brand environment, with the maximum flexibility in managing logistic and stock costs. It is a definitely a tool that every professional should use.
Laert Klemo
CTO, Eagle Security System
After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
Adil Demiri
CTO, SGN d.o.o.
For years we struggled with hundreds of transceivers from different vendors but this is finally over!
With FLEXBOX we can easily reconfigure our transceivers which in the end saves a lot of time and money.
Marcel Wösle
Director Infrastructure Services, Avira Operations GmbH & Co.KG