100G SFP-DD ER 40 km, λ1311 nm, LC-Duplex, Singlemode
- 1311 nm
- 40 km
- 106.25 G
- 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP-DD |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | ER |
| Operating Temperature | Standard |
| Modulation | PAM4 |
| Distance | 40 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 106.25 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 3.5 W |
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 17.7 dB |
| Transmit min/max per lane | 1.7 dBm / 7.1 dBm |
| Receiver min/max per lane | -16 dBm / -2.4 dBm (overload) @100G |
| Wavelength TX (Typical) | 1311 nm |
| Wavelength TX (Range) | 1304.5 - 1317.5 nm |
|---|---|
| Wavelength RX (Typical) | 1311 nm |
| Wavelength RX (Range) | 1304.5 - 1317.5 nm |
| Laser | EML |
| Receiver Type | APD |
| Modulation | PAM4 @100G |
| Transmit and Dispersion Penalty | 7.9 dB |
| Extinction Ratio | 5 dB |
| Supported Protocols | 100G Ethernet |
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
It's just a genius device. So easy to use and simple! I would recommend it to every network engineer. Plug-in the module, program and its ready for deployment!
Extensive list of supported vendors.
Your product is like a Swiss Army Knife that all Engineers should have!!
Great Job and keep it up!
The FLEXBOX was easy to set up and use, and the programmable transceivers worked seamlessly in several different brand devices. This will make our spares much easier to manage.
Now that I’m done configuring my equipment, I use FLEXBOX to impress associates.
I’m an IT Hero just for the savings, not to mention the FLEXibility to stock one type for each adapter.
Keep up the good work!