100G SFP112 ER 30 km, λ1311 nm, LC-Duplex, Singlemode
- 1311 nm
- 30 km
- 112 G
- 100G ETH
Specification
| Form Factor | SFP112 |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | ER |
| Operating Temperature | Standard |
| Distance | 30 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 112 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 3.5 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 14.7 dB |
| Transmit min/max per lane | 0 dBm / 5.6 dBm |
| Receiver min/max per lane | -14.7 dBm / -3.4 dBm (overload) @100G |
| Wavelength TX (Typical) | 1311 nm |
| Wavelength TX (Range) | 1304.5 - 1317.5 nm |
| Wavelength RX (Typical) | 1311 nm |
|---|---|
| Wavelength RX (Range) | 1304.5 - 1317.5 nm |
| Laser | EML |
| Receiver Type | PIN |
| Modulation | PAM4 @100G |
| Extinction Ratio | 5 dB |
| Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
I personally did not know FLEXOPTIX yet, but since I got in contact with it the first time, I do not want to miss it anymore. Very good product. I like the ability to program them to vendor specific SFPs which are recognized as they would be original ones. If the hardware behind changes I can simply change the SFPs to new vendor specific ones.
Thank you for such a great product.
I have received my orders from them in blistering speed. Happy to the nth degree.
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the FLEXOPTIX robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Ordering and using FLEXOPTIX transceivers was far quicker than even getting a quote from traditional vendors.
Using the FLEXBOX is super easy and fast - 5 minutes to get transceivers ready including unboxing and enjoying packaged marshmallows.