100G SFP112 FR 2 km, λ1311 nm, LC-Duplex, Singlemode
- 1311 nm
- 2 km
- 112 G
- 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | SFP112 |
|---|---|
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | FR |
| Operating Temperature | Standard |
| Distance | 2 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 112 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 14 W |
|---|---|
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 4 dB |
| Transmit min/max per lane | -3.1 dBm / 4 dBm |
| Receiver min/max per lane | -7.1 dBm / 4 dBm (overload) @100G |
| Wavelength TX (Typical) | 1311 nm |
| Wavelength TX (Range) | 1304.5 - 1317.5 nm |
| Wavelength RX (Typical) | 1311 nm |
|---|---|
| Wavelength RX (Range) | 1304.5 - 1317.5 nm |
| Laser | EML |
| Receiver Type | PIN |
| Modulation | PAM4 @100G |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
Working with the FLEXOPTIX Transceivers and FLEXBOX is not only uncomplicated but offers us the possibility of working with many vendor types to support the different campus networks. Thanks guys - awesome work.
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
The FLEXBOX was easy to set up and use, and the programmable transceivers worked seamlessly in several different brand devices. This will make our spares much easier to manage.
FLEXBOX makes it easier than ever to manage your optics hardware! From unboxing to a configured module in a minute! Great product.