800G Finned-Top OSFP to Flat-Top OSFP DAC Passive Copper Cable, 0.5 - 3 m

Universal Direct Attached Cable (DAC), 0.5 - 3 m
Use FLEXBOX to configure to almost any vendor
Finned-Top OSFP to Flat-Top OSFP (needs port with riding heat sink)
PAM4 modulated signal
Application: Infiniband 2x400Gb/s Quantum-2 & InfiniBand Spectrum-4 Ethernet switch-to-switch and switch-to-DGX-H100
Supported Datarate 850 Gbit/s
Modules are permanently attached to each end
Low power consumption < 1.2 W (less than 0.6 W per terminal)
Connect different host systems by configuring each side individually
Specs
  • pl_copper Twinax
  • pl_distance 0.5m - 3m
  • pl_datarate 850 G
Protocols
  • 2x 400G NDR
  • 800G ETH
  • 800G XDR
Request compatibility chevron-right
Part number
OR.Czz8HG.z

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
x Cancel OK chevron-right
information-circle You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

    chevron-down
800G Closed-Top OSFP SR8 with dual CDR 100 m, 8x λ850 nm, MTP/MPO-16 APC, Multimode 
800G Closed-Top OSFP SR8 with dual CDR | 100 m, 8x λ850 nm, MTP/MPO-16 APC, Multimode
0 pcs in stock As low as 1,599.26 EUR
+
MTP® female APC to 8x LC-Duplex Multimode OM4 Breakout cable 16 Cores, MPO compliant, 50/125 µm, purple, 0.5 m - 100 m 
MTP&reg; female APC to 8x LC-Duplex Multimode OM4 Breakout cable | 16 Cores, MPO compliant, 50/125 &#181;m, purple, 0.5 m - 100 m
As low as 96.77 EUR
+
800G Flat-Top OSFP VR8 with dual CDR 50 m, 8x λ850 nm, MTP/MPO-16 APC, Multimode 
800G Flat-Top OSFP VR8 with dual CDR | 50 m, 8x λ850 nm, MTP/MPO-16 APC, Multimode
0 pcs in stock As low as 1,599.26 EUR
pdp_spec

Specification

Compliance Code DAC
Form Factor OSFP to OSFP
OSFP Variant Finned-Top to Flat-Top
Interface Direct Attached Cable
Operating Temperature Standard
Modulation PAM4
Length 2.5 m
Cable Diameter 28 AWG
Temperature Range 0°C - 70°C
Bandwidth 850 Gbit/s
Digital Diagnostic Monitoring (DDM) implemented
Power Consumption 1.2 W (0.6 W + 0.6 W)
CDR none
Modulation PAM4
Supported Protocols 800G Ethernet, 800G Infiniband (2xNDR), 800G Infiniband XDR
FLEXBOX

Transceiver Configuration with FLEXBOX

It's that easy to use
insert
Insert into the FLEXBOX
select
Select and Configure
use
Use with Device
How to get your free FLEXBOX? chevron-right
pdp_recom

What customers say

The FLEXBOX is really a great tool. It allows me to quickly re-configure transceivers. Nice additional feature is the "Power Meter & Source" tool. It allows, without additional hardware, a quick check of optical transceivers, fiber cables, fiber connections etc. 

René Oskar Kühne IT support / R.O. Kuehne

I personally did not know FLEXOPTIX yet, but since I got in contact with it the first time, I do not want to miss it anymore. Very good product. I like the ability to program them to vendor specific SFPs which are recognized as they would be original ones. If the hardware behind changes I can simply change the SFPs to new vendor specific ones.

Thank you for such a great product.

Stefan Kirbes System Administrator / INTERCOM Austria GmbH

Just wanted to express my giddy happiness at how fast your crack team of ninjas were able to get optics to my desk.

Donal Cunningham Senior Network Engineer / Airspeed Telecom

FLEXOPTIX have saved us from the misery and disappointment of searching in vain through our box of old, single-vendor transceivers when we need to connect up a device, only to find we don’t have a compatible module. Having the FLEXBOX and programmable transceivers in our toolbox means we’ve always got the right transceiver for any device.  The icing on the cake is the mobility pack which allows you to program any transceivers, anywhere, any time, with just a mobile phone and the FLEXBOX .  Absolutely brilliant and couldn't ask for more.

Stuart Willson Infrastructure Engineer / Surrey Satellite Technology Limited
More chevron-right