2.67G STM-16 SFP CWDM ~120 km / 34 dB, 1270 nm - 1610 nm, DDM, LC-Duplex

Universal SDH SFP Transceiver - CWDM
Use FLEXBOX to configure to almost any vendor
CWDM for multiple applications over one duplex fiber
Capable of operating in SDH / SONET networks
Supported Data Rates: 100 Mbit/s - 2.67 Gbit/s
Powerbudget of 34 dB for up to 120 km using an OS2 ITU-T G.652 fiber
Digital Diagnostic Monitoring (DDM)
Specs
  • CWDM
  • ~120 km / 34 dB
  • 2.67 G
Protocols
  • 100M ETH
  • 1G ETH
  • 1G FC
  • 2G FC
  • STM-1
  • STM-16
  • STM-4
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Part number
S.1626.34.xD
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

Specification

Form Factor SFP
Connector / Polish LC-Duplex PC
Interface CWDM
Type CWDM STM-16
Distance 120 km
Temperature Range 0°C - 70°C
Bandwidth 100 Mbit/s - 2.67 Gbit/s
Digital Diagnostic Management (DDM) Externally Calibrated
Power Consumption 1 W
CDR none
Inbuilt FEC No
Powerbudget (dB) 34 dB
Transmit min/max per lane 4 dBm / 7 dBm
Receiver min/max per lane -30 dBm / -24 dBm (overload)
Wavelength TX (Typical) Channel R - 1610 nm
Wavelength RX (Range) 1260 - 1620 nm
Laser DFB
Receiver Type APD
Modulation NRZ
Transmit and Dispersion Penalty 1 dB
Extinction Ratio 8.2 dB
Supported Protocols 1G Fibre Channel, 2G Fibre Channel, Fast Ethernet, Gigabit Ethernet, STM-1, STM-16, STM-4

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
  • ADVA 0061704498 compatible
  • Ciena (ex. Nortel) NTK596TH compatible
  • Cisco Systems ONS-SC-Z3-1610 compatible
  • Cisco Systems SFP-CWDM-1610 compatible
  • Coriant (ex. Tellabs) TR-0009 compatible
  • Huawei eSFP-LH80-SM1611 compatible
  • Huawei S-SFP-GE-LH80-SM1610 compatible
  • Infinera (ex. Transmode) TRX100026/08 compatible
  • Infinera (ex. Transmode) TRX100036/08 compatible
  • Infinera TOM-100M-C61-L2 compatible
  • Infinera TOM-MR-C61-LR2 compatible
  • Juniper SFP-1GE-LH compatible
  • Marconi SU68CU compatible
  • Net Insight NPA0022-LL11 compatible
  • Nokia (ex. Alcatel-Lucent) 3FE29549CA compatible
  • Nokia Siemens Networks V50017-U3161-K500 compatible
Your vendor / compatibility is missing?

What customers say

We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the flexoptix robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
Nick Derksen Infrastructure Engineer, Previder B.V
The FLEXBOX was easy to set up and use, and the programmable transceivers worked seamlessly in several different brand devices. This will make our spares much easier to manage.
Shaun James Engineering Inspector, Tata Steel Strip Products UK

FLEXOPTIX have saved us from the misery and disappointment of searching in vain through our box of old, single-vendor transceivers when we need to connect up a device, only to find we don’t have a compatible module. Having the FLEXBOX and programmable transceivers in our toolbox means we’ve always got the right transceiver for any device.  The icing on the cake is the mobility pack which allows you to program any transceivers, anywhere, any time, with just a mobile phone and the FLEXBOX .  Absolutely brilliant and couldn't ask for more.

Stuart Willson Infrastructure Engineer/ Surrey Satellite Technology Limited

FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.

Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models

now I can operate and adapt to each on site production.

Emilio Vargas Production Manager / Liga ACE esports
More