1.6T Closed-Top OSFP224 2x DR4 with CDR 500 m, 8x λ1311 nm, MTP/MPO-8/12 APC, Singlemode
- 8x 1311 nm
- 500 m
- 2x 850 G
- MTP/MPO-8/12
- 1.6T ETH
- 2x 800G ETH
Specification
| Form Factor | OSFP224 |
|---|---|
| OSFP Variant | Closed-Top |
| Connector / Polish | 2x MTP/MPO-8/12 APC |
| Interface | Singlemode |
| Compliance Code | 2x DR4 |
| Operating Temperature | Standard |
| Distance | 500 m |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 2x 850 Gbit/s |
| Bandwidth Per Lane | 212.5 Gbit/s |
|---|---|
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 18 W |
| CDR | TX only |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 3 dB |
| Transmit min/max per lane | -3.1 dBm / 4 dBm |
| Receiver min/max per lane | -6.1 dBm / 4 dBm (overload) @1.6T |
| Wavelength TX (Typical) | 8x 1311 nm |
| Wavelength TX (Range) | 1304.5 - 1317.5 nm |
|---|---|
| Wavelength RX (Typical) | 8x 1311 nm |
| Laser | SiPho MZ |
| Receiver Type | PIN |
| Modulation | PAM4 @1.6T |
| Transmit and Dispersion Penalty | 3.4 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 1.6T Ethernet, 2x 800G Ethernet |
| CMIS Version | 5.3 |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day.
With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably.
Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver.
We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field.
Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.
The FLEXBOX has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the FLEXBOX was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the FLEXBOX in the future! :)
It's just a genius device. So easy to use and simple! I would recommend it to every network engineer. Plug-in the module, program and its ready for deployment!
The SFP are exactly like promise on the web page, and the configuration tool is so amazing. I worked years with SFP and optical fiber and this tool is so great. It include a power meter an OTDR and allow to diagnose and configure the SFP for many vendors. It will help us in our research and also to manage our LAN. Thank you FLEXOPTIX