800G Closed-Top OSFP112 2x FR4 LPO 2 km, λ1271-1331 nm, LC-Duplex, Singlemode
- int. Mux
- 2 km
- 2x 425 G
- LC
- 2x 400G ETH
- 800G ETH
Specification
| Form Factor | OSFP112 |
|---|---|
| OSFP Variant | Closed-Top |
| Connector / Polish | 2x LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | 2x FR4 |
| Operating Temperature | Standard |
| Distance | 2 km |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 2x 425 Gbit/s |
|---|---|
| Bandwidth Per Lane | 106.25 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 10 W |
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 4 dB |
| Transmit min/max per lane | -3.2 dBm / 4.4 dBm |
| Receiver min/max per lane | -7.2 dBm / 4.4 dBm (overload) @800G |
|---|---|
| Wavelength TX (Typical) | 1271 nm, 1271 nm, 1291 nm, 1291 nm, 1311 nm, 1311 nm, 1331 nm, 1331 nm |
| Wavelength RX (Typical) | 1271 nm, 1271 nm, 1291 nm, 1291 nm, 1311 nm, 1311 nm, 1331 nm, 1331 nm |
| Laser | SiPho MZ |
| Receiver Type | SOA + PIN |
| Modulation | PAM4 @800G |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 2x 400G Ethernet, 800G Ethernet |
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
The FLEXBOX allows us to quickly configure our transceivers for every application. No more need to keep transceivers of every type and vendor in stock. Any problems with a transceiver configuration? Thanks to the lightning fast FLEXOPTIX Service Desk you’ll solve every issue as quick as possible.
I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.