800G Closed-Top OSFP112 DR8 LPO with dual CDR 500 m, 8x λ1311 nm, MTP/MPO-16, Singlemode
- 8x 1311 nm
- 500 m
- 850 G
- MTP/MPO-16
- 800G ETH
- 8x 100G ETH
Specification
| Form Factor | OSFP112 |
|---|---|
| OSFP Variant | Closed-Top |
| Connector / Polish | MTP/MPO-16 PC |
| Interface | Singlemode |
| Compliance Code | DR8 |
| Operating Temperature | Standard |
| Distance | 500 m |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 850 Gbit/s |
|---|---|
| Bandwidth Per Lane | 106.25 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 9 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 3 dB |
| Transmit min/max per lane | -2.9 dBm / 4 dBm |
| Receiver min/max per lane | -5.9 dBm / 4 dBm (overload) @800G |
|---|---|
| Wavelength TX (Typical) | 8x 1311 nm |
| Wavelength TX (Range) | 1304.5 - 1317.5 nm |
| Wavelength RX (Typical) | 8x 1311 nm |
| Laser | SiPho MZ |
| Receiver Type | PIN |
| Modulation | PAM4 @800G |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 800G Ethernet, 8x 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
I personally did not know FLEXOPTIX yet, but since I got in contact with it the first time, I do not want to miss it anymore. Very good product. I like the ability to program them to vendor specific SFPs which are recognized as they would be original ones. If the hardware behind changes I can simply change the SFPs to new vendor specific ones.
Thank you for such a great product.
We use FLEXOPTIX modules for years with different networking hardware. Amazing and very stable products without any issues. Preparing a big network project with several switch vendors it was time to do the next step and order a FLEXBOX. Now we can be much more flexible that before and the provided tools are fast, stable, easy to use and as stable as all other FLEXOPTIX producs. All in all - highest recommendation!
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
When in possession of the FLEXBOX it becomes and indispensable tool in general, and also specifically in managing remote Mobile Base Stations fiber connectivity.
Using the FLEXBOX either with PC or Smartphone is really plug and play with no annoying incompatibility issues at all.
The FLEXBOX together with ease of order and superior delivery times makes it literally unnecessary for us having any significant SFP stock.