800G Closed-Top OSFP 2x DR4 LPO 500 m, 8x λ1311 nm, MTP/MPO-8/12 APC, Singlemode
Compliant with 100G DR LPO MSA
- 8x 1311 nm
- 500 m
- 2x 425 G
- MTP/MPO-8/12
- 2x 400G ETH
- 400G ETH
- 800G ETH
-
Matching Products
-
Matching Products
Specification
| Form Factor | OSFP |
|---|---|
| OSFP Variant | Closed-Top |
| Connector / Polish | 2x MTP/MPO-8/12 APC |
| Interface | Singlemode |
| Compliance Code | 2x DR4 |
| Operating Temperature | Standard |
| Modulation | PAM4 |
| Distance | 500 m |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 2x 425 Gbit/s |
|---|---|
| Bandwidth Per Lane | 106.25 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 9 W |
| CDR | none |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 1 dB |
| Transmit min/max per lane | -2.9 dBm / 4 dBm |
| Receiver min/max per lane | -3.9 dBm / 4 dBm (overload) @400G |
| Wavelength TX (Typical) | 8x 1311 nm |
|---|---|
| Wavelength TX (Range) | 1304.5 - 1317.5 nm |
| Wavelength RX (Typical) | 8x 1311 nm |
| Laser | SiPho MZ |
| Receiver Type | PIN |
| Modulation | PAM4 @400G |
| Transmit and Dispersion Penalty | 3.4 dB |
| Extinction Ratio | 2.5 dB |
| Supported Protocols | 2x 400G Ethernet, 800G Ethernet, 400G Ethernet |
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- Accton OSFP-2DR4-LPO compatible
- Arista LPO-800G-2DR4 compatible
What customers say
After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!
Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day.
With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably.
Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver.
We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field.
Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.
Now that I’m done configuring my equipment, I use FLEXBOX to impress associates.
I’m an IT Hero just for the savings, not to mention the FLEXibility to stock one type for each adapter.
Keep up the good work!
Just wanted to express my giddy happiness at how fast your crack team of ninjas were able to get optics to my desk.