800G Closed-Top OSFP112 Multirate High-power Coherent Tunable DWDM with FEC ZR with dual CDR 120 km, C-Band, Tx -1dBm, LC-Duplex, Singlemode
- Coherent high-power DWDM
- 120 km
- 850 G
- Tunable
- 2x 400G ETH
- 4x 200G ETH
- 800G ETH
- 8x 100G ETH
Specification
| Form Factor | OSFP112 |
|---|---|
| OSFP Variant | Closed-Top |
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode high-power DWDM |
| Compliance Code | ZR |
| Operating Temperature | Standard |
| Distance | 120 km |
| Temperature Range | 0°C - 70°C |
| Bandwidth | 850 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
|---|---|
| Power Consumption | 28 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | Yes, OFEC |
| Powerbudget (dB) | 8 dB |
| Transmit min/max per lane | -8 dBm / -1 dBm |
| Receiver min/max per lane | -9 dBm / -2 dBm (overload) @800G |
| Wavelength TX (Typical) | tunable Coherent high-power DWDM |
| TX Tunable Range | 1528.77 - 1567.13 nm |
|---|---|
| Wavelength RX (Range) | 1528.8 - 1567.1 nm |
| Laser | SiPho MZ |
| Receiver Type | Coherent |
| Modulation | DP-16QAM @800G |
| OSNR | 35 dB/0.1nm @800G |
| Supported Protocols | 2x 400G Ethernet, 4x 200G Ethernet, 800G Ethernet, 8x 100G Ethernet |
| CMIS Version | 5.3 |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
I have my own company, and I work as a network consultant for different customers, especially in the wind turbine business. I am often on turbine sites in the middle of the ocean, where I need a SFP of a certain type/vendor. By using the FLEXOPTIX FLEXBOX, I have solved a very big issue, just by having this tool and some FLEXOPTIX SFP`s in my bag. Then I can solve the issue, and get the site up and running immediately. This saves another trip to site (often by helicopter), and a lot of money and time. I am very exited about this product, and will certainly recommend this product to everybody.
We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!
The FLEXBOX has been an amazing tool for our Equinix AM5 deployments, we have used many brands previously however the FLEXBOX was superior right from the start, especially when working in the datacenter and not needing to hold my laptop in my hand but my phone, which is just amazing for rapid deployments.
Looking forward to keep using the FLEXBOX in the future! :)
FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.