800G Closed-Top OSFP SR8 with dual CDR 100 m, 8x λ850 nm, MTP/MPO-16 APC, Multimode
- 8x 850 nm
- 100 m
- 850 G
- MTP/MPO-16
- 200G ETH
- 2x 400G ETH
- 800G ETH
- 8x 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | OSFP |
|---|---|
| OSFP Variant | Closed-Top |
| Connector / Polish | MTP/MPO-16 APC |
| Interface | Multimode |
| Compliance Code | SR8 |
| Operating Temperature | Standard |
| Modulation | PAM4 |
| Distance | 100 m |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
|---|---|
| Bandwidth | 850 Gbit/s |
| Bandwidth Per Lane | 106.25 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 15.5 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 1.8 dB |
| Transmit min/max per lane | -4.6 dBm / 4 dBm |
|---|---|
| Receiver min/max per lane | -6.4 dBm / 5 dBm (overload) @800G |
| Wavelength TX (Typical) | 8x 850 nm |
| Wavelength TX (Range) | 844 - 863 nm |
| Wavelength RX (Typical) | 8x 850 nm |
| Laser | VCSEL |
| Receiver Type | PIN |
| Modulation | PAM4 @800G |
| Supported Protocols | 2x 400G Ethernet, 800G Ethernet, 8x 100G Ethernet, 200G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
FLEXBOX is not only awesome but also easy to use. One of the standout features of FLEXOPTIX is their compatibility with various vendors. Whether you're working with different hardware providers, you can rely on FLEXOPTIX to work seamlessly across different platforms.
Moreover, the support for FLEXBOX and FLEXOPTIX is exceptional. If you encounter any issues or have questions, you can rely on the support teams to provide timely and effective assistance. They are dedicated to ensuring that users have a smooth experience and can make the most of these technologies.
Ordering and using FLEXOPTIX transceivers was far quicker than even getting a quote from traditional vendors.
Using the FLEXBOX is super easy and fast - 5 minutes to get transceivers ready including unboxing and enjoying packaged marshmallows.
I had the chance to flash my first transceiver with the FLEXBOX and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the FLEXBOX. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my FLEXBOX for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.
The FLEXBOX was easy to set up and use, and the programmable transceivers worked seamlessly in several different brand devices. This will make our spares much easier to manage.