800G Closed-Top OSFP 2x SR4 with dual CDR 100 m, 8x λ850 nm, MTP/MPO-8/12 APC, Multimode

Universal Closed-Top OSFP Transceiver
Use FLEXBOX to configure to almost any vendor
For 800GBASE-SR4 Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Supported Data Rates: 2x 425 Gbit/s
Up to 100 m via Multimode OM4
Use ONLY with MTP/MPO-8/12 APC connectors
Specs
  • pl_lambda 8x 850 nm
  • pl_distance 100 m
  • pl_datarate 2x 425 G
  • pl_connector MTP/MPO-8/12
Protocols
  • 2x 400G ETH
  • 2x 400G NDR
  • 400G ETH
  • 800G ETH
information-circle
Selection "S2":
Country of Origin
Germany,
Belgium,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility chevron-right
Part number
O.854HG2.C.01.P:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
x Cancel OK chevron-right
information-circle You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Alternatives

    chevron-down

  • Matching Products

    chevron-down
pl_distance Lower Power Budget
800G Closed-Top OSFP 2x VR4 with dual CDR 50 m, 8x λ850 nm, MTP/MPO-8/12 APC, Multimode 
800G Closed-Top OSFP 2x VR4 with dual CDR | 50 m, 8x λ850 nm, MTP/MPO-8/12 APC, Multimode
0 pcs in stock As low as 1,001.98 EUR
MTP® female APC to MTP® female APC Multimode OM4 cable 8 Cores, MPO compliant, 50/125 µm, purple, 0.5 m - 100 m 
MTP® female APC to MTP® female APC Multimode OM4 cable | 8 Cores, MPO compliant, 50/125 µm, purple, 0.5 m - 100 m
As low as 68.07 EUR
800G Finned-Top OSFP 2x SR4 with dual CDR 100 m, 8x λ850 nm, MTP/MPO-8/12 APC, Multimode 
800G Finned-Top OSFP 2x SR4 with dual CDR | 100 m, 8x λ850 nm, MTP/MPO-8/12 APC, Multimode
0 pcs in stock As low as 965.36 EUR
400G Flat-Top OSFP112 DR4 with dual CDR 500 m, 4x λ1311 nm, MTP/MPO-8/12 APC, Singlemode 
400G Flat-Top OSFP112 DR4 with dual CDR | 500 m, 4x λ1311 nm, MTP/MPO-8/12 APC, Singlemode
4 pcs in stock As low as 700.86 EUR
pdp_spec

Specification

Form Factor OSFP
OSFP Variant Closed-Top
Connector / Polish 2x MTP/MPO-8/12 APC
Interface Multimode
Compliance Code 2x SR4
Operating Temperature Standard
Distance 100 m
Temperature Range 0°C - 70°C
Lane Count 8x (Tx/Rx)
Bandwidth 2x 425 Gbit/s
Bandwidth Per Lane 106.25 Gbit/s
Digital Diagnostic Monitoring (DDM) Yes, internally calibrated
Power Consumption 15 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 1.8 dB
Transmit min/max per lane -4.6 dBm / 4 dBm
Receiver min/max per lane -6.4 dBm / 4 dBm (overload) @800G
Wavelength TX (Typical) 8x 850 nm
Wavelength TX (Range) 844 - 863 nm
Wavelength RX (Typical) 8x 850 nm
Laser VCSEL
Receiver Type PIN
Modulation PAM4 @800G
Extinction Ratio 2.5 dB
Supported Protocols 2x 400G Ethernet, 800G Ethernet, 800G Infiniband (2xNDR), 400G Ethernet
FLEXBOX

Transceiver Configuration with FLEXBOX

It's that easy to use
insert
Insert into the FLEXBOX
select
Select and Configure
use
Use with Device
How to get your free FLEXBOX? chevron-right
pdp_recom

What customers say

FLEXOPTIX creates overall great and reliable products. We need optics for multiple vendors and with the FLEXBOX we are able to simplify our spare part handling.
The best part of the FLEXBOX are the Linux drivers and therefore no need for any additional OS just for branding optics.

Dominik Grueber Network Administrations / Hetzner Online GmbH

After many years of using clumsy EEPROM programmers, soldering irons, hammers etc. to make SFP modules work properly, now FLEXBOX allows me to do the same thing in a fraction of time. I only hope my boss doesn't find out I have so much free time now!

Adil Demiri CTO / SGN d.o.o.

For years we struggled with hundreds of transceivers from different vendors but this is finally over! 
With FLEXBOX we can easily reconfigure our transceivers which in the end saves a lot of time and money.

Marcel Wösle Director Infrastructure Services / Avira Operations GmbH & Co.KG

The flashing is very quick and you can configure it to flash multiple devices in a row. Definitely well worth it.

Adam Montgomery Co-Founder/ Necto Inc
More chevron-right