400G Closed-Top OSFP SR8 with dual CDR 100 m, 8x λ850 nm, MTP/MPO-16 APC, Multimode
- 8x 850 nm
- 100 m
- 425 G
- MTP/MPO-16
- 200G HDR
- 2x 200G ETH
- 400G ETH
- 8x 50G ETH
Specification
| Form Factor | OSFP |
|---|---|
| OSFP Variant | Closed-Top |
| Connector / Polish | MTP/MPO-16 APC |
| Interface | Multimode |
| Compliance Code | SR8 |
| Operating Temperature | Standard |
| Modulation | PAM4 |
| Distance | 100 m |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 425 Gbit/s |
|---|---|
| Bandwidth Per Lane | 53.13 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 10 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 1.9 dB |
| Transmit min/max per lane | -6.5 dBm / 4 dBm |
| Receiver min/max per lane | -8.4 dBm / 4 dBm (overload) @400G |
| Wavelength TX (Typical) | 8x 850 nm |
|---|---|
| Wavelength TX (Range) | 840 - 868 nm |
| Wavelength RX (Typical) | 8x 850 nm |
| Laser | VCSEL |
| Receiver Type | PIN |
| Modulation | PAM4 @400G |
| Transmit and Dispersion Penalty | 4.5 dB |
| Extinction Ratio | 3 dB |
| Supported Protocols | 200G Infiniband HDR, 2x 200G Ethernet, 8x 50G Ethernet, 400G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
Using FLEXBOX we have been able to deliver high quality optical adapter product range in a mixed brand environment, with the maximum flexibility in managing logistic and stock costs. It is a definitely a tool that every professional should use.
The FLEXBOX has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The FLEXOPTIX universal transceivers are very easy to configure and we will be ordering these in the future.
The flashing is very quick and you can configure it to flash multiple devices in a row. Definitely well worth it.