400G Finned-Top OSFP SR4 with dual CDR 100 m, 4x λ850 nm, MTP/MPO-8/12 APC, Multimode
- 4x 850 nm
- 100 m
- 425 G
- MTP/MPO-8/12
- 2x 200G ETH
- 400G ETH
- 4x 100G ETH
Specification
| Form Factor | OSFP |
|---|---|
| OSFP Variant | Finned-Top |
| Connector / Polish | MTP/MPO-8/12 APC |
| Interface | Multimode |
| Compliance Code | SR4 |
| Operating Temperature | Standard |
| Modulation | PAM4 |
| Distance | 100 m |
| Temperature Range | 0°C - 70°C |
| Lane Count | 4x (Tx/Rx) |
|---|---|
| Bandwidth | 425 Gbit/s |
| Bandwidth Per Lane | 106.25 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 9 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 3.8 dB |
| Transmit min/max per lane | -2.6 dBm / 3.5 dBm |
|---|---|
| Receiver min/max per lane | -6.4 dBm / 4 dBm (overload) @400G |
| Wavelength TX (Typical) | 4x 850 nm |
| Wavelength TX (Range) | 840 - 868 nm |
| Wavelength RX (Typical) | 4x 850 nm |
| Laser | VCSEL |
| Receiver Type | PIN |
| Modulation | PAM4 @400G |
| Supported Protocols | 2x 200G Ethernet, 4x 100G Ethernet, 400G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard (Default) o.854hg.01.p compatible
What customers say
FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.
Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models
now I can operate and adapt to each on site production.
Using FLEXBOX and FLEXOPTIX transceivers mean for us Flexibility. We don’t use so much transceivers but we work with different brands each day.
With a small amount in stock we can configure them with the right specifications for each use. Assuring it will perfectly fit the requirements of our equipments and costs are also reduced considerably.
Setting up either the FLEXBOX and a transceiver on a computer or through the mobile app is just easy as 1,2,3. It tooks us less than 15 minutes between unboxing and using a transceiver.
We really appreciate the mobile option so we can have the FLEXBOX in one hand, a transceiver in the other one and the phone with the app in the pocket for programming on the field.
Thanks FLEXOPTIX for this really useful tool and for extending supported vendors in the future.
FLEXOPTIX have saved us from the misery and disappointment of searching in vain through our box of old, single-vendor transceivers when we need to connect up a device, only to find we don’t have a compatible module. Having the FLEXBOX and programmable transceivers in our toolbox means we’ve always got the right transceiver for any device. The icing on the cake is the mobility pack which allows you to program any transceivers, anywhere, any time, with just a mobile phone and the FLEXBOX . Absolutely brilliant and couldn't ask for more.
The FLEXBOX is the best thing since sliced bread!