400G Finned-Top OSFP SR8 with dual CDR 100 m, 8x λ850 nm, MTP/MPO-16 APC, Multimode

Universal Finned-Top OSFP Transceiver
Use FLEXBOX in combination with FLEXSOX to configure to almost any vendor
For 400GBASE-SR8 Ethernet links
Integrated Clock-Data-Recovery (CDR)
PAM4 modulated signal
Attention: SR8 OSFP with MPO/MTP-16 APC
Supported Data Rates: 425 Gbit/s (8x 53.13 Gbit/s)
Up to 100 m via Multimode OM4
Use ONLY with MTP/MPO-16 APC connectors
Specs
  • 8x 850 nm
  • 100 m
  • 425 G
  • MTP/MPO-16
Protocols
  • 200G HDR
  • 2x 200G ETH
  • 400G ETH
  • 4x 100G ETH
  • 8x 50G ETH
Selection "S2":
Country of Origin
Germany,
Thailand,
Taiwan,
Vietnam and
Malaysia
Request compatibility
Part number
O.854HG.01.MP:Sx

Add Product to Quote

If you add products discounts in this quote won't be valid anymore!
Cancel OK
You can create a quote from your cart.
Just go to cart and click CREATE QUOTE.

  • Matching Products

LWL Fibre Cleaner IBC MPO/MTP-16  
LWL Fibre Cleaner IBC MPO/MTP-16
10 pcs in stock 142.10 EUR
MTP® APC to 8x LC-Duplex Multimode OM4 Breakout cable 16 Cores, MPO compliant, 50/125 µm, purple, 0.5 m - 100 m 
MTP® APC to 8x LC-Duplex Multimode OM4 Breakout cable | 16 Cores, MPO compliant, 50/125 µm, purple, 0.5 m - 100 m
As low as 129.68 EUR

Specification

Form Factor OSFP
Connector / Polish MTP/MPO-16 APC
Interface Multimode
Compliance Code SR8
Distance 100 m
Temperature Range 0°C - 70°C
Lane Count 8x (Tx/Rx)
Bandwidth 425 Gbit/s
Bandwith Per Lane 53.13 Gbit/s
Digital Diagnostic Management (DDM) Yes, internally calibrated
Power Consumption 10 W
CDR TX and RX
SGMII No
Inbuilt FEC No
Powerbudget (dB) 1.9 dB
Transmit min/max per lane -6.5 dBm / 4 dBm
Receiver min/max per lane -8.4 dBm / 4 dBm (overload) @400G
Wavelength TX (Typical) 8x 850 nm
Wavelength TX (Range) 840 - 868 nm
Wavelength RX (Typical) 8x 850 nm
Laser VCSEL
Receiver Type PIN
Modulation PAM4 @400G
Transmit and Dispersion Penalty 4.5 dB
Extinction Ratio 3 dB
Supported Protocols 200G Infiniband HDR, 2x 200G Ethernet, 4x 100G Ethernet, 8x 50G Ethernet, 400G Ethernet

Transceiver Configuration with FLEXBOX

It's that easy to use
Insert Transceiver into FLEXBOX
1. Insert Into FLEXBOX
Select and Configure
2. Select And Configure
  • Choose vendor and compatibility
  • Press play
  • Configuration only takes a few seconds
Use with Device
3. Use With Device
  • Use the transceiver in your device. That's it!
  • Need it for another device? - Re-configure it again and again
How to get your free FLEXBOX

Compatibility

All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.

  • MSA Standard compatible
Your vendor / compatibility is missing?

What customers say

Now that I’m done configuring my equipment, I use FLEXBOX to impress associates. I’m an IT Hero just for the savings, not to mention the FLEXibility to stock one type for each adapter. Keep up the good work!
Nikos Papandreou Dipl. Civil Engineer acting as IT Admin/SQL Dev, Geitonas School SA

We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!

Stefan van Merriënboer Senior ICT Consultant / Effisol
FLEXBOX allows us to reduce the amount of spare transceivers we keep for our diverse hardware systems, thereby keeping overall cost low.
Sven Gebhardt Head of Platforms & Services, grandcentrix GmbH
We will now be able to source all our SFPs from a single vendor without having to worry about the configuration. That translates to peace of mind and huge flexibility. Well done guys!
Gregory Agerba CTO, Neocarrier Communications
More