1.6T Closed-Top OSFP224 2x FR4 with dual CDR 2 km, λ1271-1331 nm, LC-Duplex, Singlemode
- int. Mux
- 2 km
- 2x 907.5 G
- LC
- 1.6T ETH
- 1.6T XDR
- 2x 800G ETH
- 2x 800G XDR
- 4x 400G ETH
- 4x 400G XDR
- 800G ETH
- 8x 200G ETH
- 8x 200G XDR
Specification
| Form Factor | OSFP224 |
|---|---|
| OSFP Variant | Closed-Top |
| Connector / Polish | 2x LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | 2x FR4 |
| Operating Temperature | Standard |
| Distance | 2 km |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 2x 907.5 Gbit/s |
|---|---|
| Bandwidth Per Lane | 226.88 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 27 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 4 dB |
| Transmit min/max per lane | -2.2 dBm / 4.9 dBm |
| Receiver min/max per lane | -6.2 dBm / 4.9 dBm (overload) @800G |
|---|---|
| Wavelength TX (Typical) | 1271 nm, 1271 nm, 1291 nm, 1291 nm, 1311 nm, 1311 nm, 1331 nm, 1331 nm |
| Wavelength RX (Typical) | 1271 nm, 1271 nm, 1291 nm, 1291 nm, 1311 nm, 1311 nm, 1331 nm, 1331 nm |
| Laser | SiPho MZ |
| Receiver Type | PIN |
| Modulation | PAM4 @800G |
| Transmit and Dispersion Penalty | 3.4 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 1.6T Ethernet, 1.6T Infiniband XDR, 2x 800G Ethernet, 2x 800G Infiniband XDR, 4x 400G Ethernet, 4x 400G Infiniband XDR, 800G Ethernet, 8x 200G Ethernet, 8x 200G Infiniband XDR |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
We use “FLEXBOX” and “FLEXOPTIX” for a few years now. Since then life is much easier. And even saved me sometimes in the middle of the night. Need a special vendor or type, plug it in, program, and done. Very… but very occasionally a compatibility is not present in the system. Just drop a e-mail to support with your needs to get an immediate response from “JIRA – the FLEXOPTIX robot” and your compatibility is added to your FLEXBOX within 24 hours. Just awesome!!
As a network engineer responsible for programming universal transceivers, I can confidently say that the FLEXBOX is a true game-changer in the field. Its unparalleled capabilities and user-friendly interface makes the process effortless and highly efficient.
One of the standout features of the FLEXBOX is its ability to support a wide range of transceiver types and brands. Whether you're dealing with SFP, SFP+, QSFP, the FLEXBOX has got you covered.
Great. FLEXBOX does what it says on the tin! - just connect, configure Transceiver and be happy.