800G Finned-Top OSFP 2x FR4 with dual CDR 2 km, λ1271-1331 nm, Mini-LC, Singlemode

- int. Mux
- 2 km
- 2x 425 G
- Mini-LC
- 2x 400G ETH
- 400G ETH
- 800G ETH
Specification
Form Factor | OSFP |
---|---|
Connector / Polish | 2x Mini-LC PC |
Interface | Singlemode |
Compliance Code | 2x FR4 |
Distance | 2 km |
Temperature Range | 0°C - 70°C |
Lane Count | 8x (Tx/Rx) |
Bandwidth | 2x 425 Gbit/s |
Bandwidth Per Lane | 106.25 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 16 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | No |
Powerbudget (dB) | 4 dB |
Transmit min/max per lane | -3.2 dBm / 4.4 dBm |
Receiver min/max per lane | -7.2 dBm / 4.4 dBm (overload) @400G |
Wavelength TX (Typical) | 1271 nm, 1271 nm, 1291 nm, 1291 nm, 1311 nm, 1311 nm, 1331 nm, 1331 nm |
Wavelength RX (Typical) | 1271 nm, 1271 nm, 1291 nm, 1291 nm, 1311 nm, 1311 nm, 1331 nm, 1331 nm |
---|---|
Laser | EML |
Receiver Type | PIN |
Modulation | PAM4 @400G |
Transmit and Dispersion Penalty | 3.4 dB |
Extinction Ratio | 3.5 dB |
Supported Protocols | 2x 400G Ethernet, 800G Ethernet, 400G Ethernet |
Configure Transceiver Using Your FLEXSOX
It's that easy to use- Slide your FLEXBOX V4 into your FLEXSOX
- Connect it via USB
- Start our FLEXOPTIX App
- Insert a Universal Transceiver into the corresponding slot
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.
I had the chance to flash my first transceiver with the flexbox and also navigate through the different tools on the Windows App. I must say that I’m impressed by the flexibility and available features provided by this app and the Flexbox. I flashed a 1G LX optic to be compatible with a HP switch in production (Aruba Networks(ex. HP Network) / J4858A) and the switch immediately recognized the plug freshly configured. I can know count on my flexbox for the future transceivers I’ll need to install/replace. Also, the optic measurement is a very good feature.