400G Closed-Top OSFP LR4 with dual CDR 10 km, λ1271-1331 nm, LC-Duplex, Singlemode
- int. Mux
- 10 km
- 425 G
- LC
- 2x 200G ETH
- 400G ETH
- 400G NDR
- 4x 100G ETH
Specification
| Form Factor | OSFP |
|---|---|
| OSFP Variant | Closed-Top |
| Connector / Polish | LC-Duplex PC |
| Interface | Singlemode |
| Compliance Code | LR4 |
| Operating Temperature | Standard |
| Distance | 10 km |
| Temperature Range | 0°C - 70°C |
| Lane Count | 4x (Tx/Rx) |
| Bandwidth | 425 Gbit/s |
|---|---|
| Bandwidth Per Lane | 106.25 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 10 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 9.3 dB |
| Transmit min/max per lane | 0.2 dBm / 4.4 dBm |
| Receiver min/max per lane | -9.1 dBm / 4.4 dBm (overload) @400G |
|---|---|
| Wavelength TX (Typical) | 1271 nm, 1291 nm, 1311 nm, 1331 nm |
| Wavelength RX (Typical) | 1271 nm, 1291 nm, 1311 nm, 1331 nm |
| Laser | EML |
| Receiver Type | PIN |
| Modulation | PAM4 @400G |
| Transmit and Dispersion Penalty | 3.9 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 2x 200G Ethernet, 400G Infiniband NDR, 4x 100G Ethernet, 400G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Arista 3rd_Party OSFP-400G-LR4 compatible
- Arista OSFP-400G-LR4 compatible
What customers say
In our test environment we use the optics over and over in many devices. Programming optics with the FLEXBOX is as easy as 1,2,3!
Working with the FLEXOPTIX Transceivers and FLEXBOX is not only uncomplicated but offers us the possibility of working with many vendor types to support the different campus networks. Thanks guys - awesome work.
The FLEXBOX has been an amazing tool for our fibre infrastructure upgrades as we work with different types and manufacturers of equipment, the ability to configure them on the fly when required makes the process a lot easier!
We were pleasantly surprised by the easy to use interface and the extra's such as the power meter.
The travel pack makes it easy to use it off-site in some of our satellite cabs if needed.
The FLEXOPTIX universal transceivers are very easy to configure and we will be ordering these in the future.
When in possession of the FLEXBOX it becomes and indispensable tool in general, and also specifically in managing remote Mobile Base Stations fiber connectivity.
Using the FLEXBOX either with PC or Smartphone is really plug and play with no annoying incompatibility issues at all.
The FLEXBOX together with ease of order and superior delivery times makes it literally unnecessary for us having any significant SFP stock.