1.6T Closed-Top OSFP224 2x DR4+ with dual CDR 2 km, 8x λ1311 nm, MTP/MPO-8/12 APC, Singlemode
- 8x 1311 nm
- 2 km
- 2x 850 G
- MTP/MPO-8/12
- 1.6T ETH
- 1.6T XDR
- 2x 800G ETH
- 2x 800G XDR
- 8x 200G ETH
- 8x 200G XDR
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
| Form Factor | OSFP224 |
|---|---|
| OSFP Variant | Closed-Top |
| Connector / Polish | 2x MTP/MPO-8/12 APC |
| Interface | Singlemode |
| Compliance Code | 2x DR4+ |
| Operating Temperature | Standard |
| Distance | 2 km |
| Temperature Range | 15°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 2x 850 Gbit/s |
|---|---|
| Bandwidth Per Lane | 212.5 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 27 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 4 dB |
| Transmit min/max per lane | -3.1 dBm / 4 dBm |
| Receiver min/max per lane | -7.1 dBm / 4 dBm (overload) @1.6T |
|---|---|
| Wavelength TX (Typical) | 8x 1311 nm |
| Wavelength TX (Range) | 1304.5 - 1317.5 nm |
| Wavelength RX (Typical) | 8x 1311 nm |
| Laser | SiPho MZ |
| Receiver Type | PIN |
| Modulation | PAM4 @1.6T |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 1.6T Ethernet, 1.6T Infiniband XDR, 2x 800G Ethernet, 2x 800G Infiniband XDR, 8x 200G Ethernet, 8x 200G Infiniband XDR |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
We heard about FLEXOPTIX for the quality of its FLEXBOX and optics.
We were able to acquire a FLEXBOX to help out our customers. The quality of the product leaves us speechless. We are immediately going to change optics supplier to FLEXOPTIX. The quality is excellent.
When you unpack it, you immediately notice: A lot of time and love was invested in this great device. In just a few minutes everything is ready to go and the first transceiver can be configured. The app responds quickly and is well laid out, and the search function makes it easy to find the right configuration. The FLEXBOX is ideal for us because we use switches from many different manufacturers and can thus react flexibly to changes in our infrastructure at any time. Even on site, we can make adjustments at an instant thanks to the support for mobile devices for configuration.
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
The SFPs easily integrated with our existing network equipment, ensuring cross-vendor compatibility. The build quality is very good.
Connecting to the FLEXBOX with an Android phone took only a few seconds, and configuring the SFPs was a breeze. We really liked the ability to configure multiple SFPs at once. Shipping is incredibly fast. Support is friendly, technical and helpful.