1.6T Closed-Top OSFP 2x DR8 with dual CDR 500 m, 8x λ1311 nm, MTP/MPO-8/12 APC, Singlemode
- 8x 1311 nm
- 500 m
- 2x 850 G
- MTP/MPO-8/12
- 1.6T ETH
- 1.6T XDR
- 2x 800G ETH
- 2x 800G XDR
- 4x 400G ETH
- 4x 400G XDR
- 800G ETH
- 8x 200G ETH
- 8x 200G XDR
Specification
| Form Factor | OSFP |
|---|---|
| OSFP Variant | Closed-Top |
| Connector / Polish | 2x MTP/MPO-8/12 APC |
| Interface | Singlemode |
| Compliance Code | 2x DR8 |
| Operating Temperature | Standard |
| Modulation | PAM4 |
| Distance | 500 m |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 2x 850 Gbit/s |
|---|---|
| Bandwidth Per Lane | 212.5 Gbit/s |
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 25 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | No |
| Powerbudget (dB) | 3 dB |
| Transmit min/max per lane | -3.3 dBm / 4 dBm |
| Receiver min/max per lane | -6.3 dBm / 4 dBm (overload) @800G |
| Wavelength TX (Typical) | 8x 1311 nm |
|---|---|
| Wavelength TX (Range) | 1304.5 - 1317.5 nm |
| Wavelength RX (Typical) | 8x 1311 nm |
| Laser | EML |
| Receiver Type | PIN |
| Modulation | PAM4 @800G |
| Transmit and Dispersion Penalty | 3.4 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 1.6T Ethernet, 1.6T Infiniband XDR, 2x 800G Ethernet, 2x 800G Infiniband XDR, 4x 400G Ethernet, 4x 400G Infiniband XDR, 800G Ethernet, 8x 200G Ethernet, 8x 200G Infiniband XDR |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
What customers say
The FLEXBOX allows us to use 100MBit/s to multi-gigabit transceivers in our product for a wide range of customer needs. We can not solve them without this magic box!
Since we ordered a FLEXBOX, our life as definitly changed.
There’s a before and an after FLEXBOX.
So many vendors in the compatibility matrice, so easy way to configure the module!
And the cables and accessories came also with quality.
It's just a genius device. So easy to use and simple! I would recommend it to every network engineer. Plug-in the module, program and its ready for deployment!
Working with the FLEXOPTIX Transceivers and FLEXBOX is not only uncomplicated but offers us the possibility of working with many vendor types to support the different campus networks. Thanks guys - awesome work.