800G Flat-Top OSFP 2x DR4 with dual CDR 500 m, 8x λ1311 nm, MTP/MPO-8/12 APC, Singlemode
- 8x 1311 nm
- 500 m
- 2x 425 G
- MTP/MPO-8/12
- 2x 400G ETH
- 400G ETH
- 4x 200G ETH
- 800G ETH
- 8x 100G ETH
-
Matching Products
-
Matching Products
Specification
| Form Factor | OSFP |
|---|---|
| OSFP Variant | Flat-Top |
| Connector / Polish | 2x MTP/MPO-8/12 APC |
| Interface | Singlemode |
| Compliance Code | 2x DR4 |
| Operating Temperature | Standard |
| Distance | 500 m |
| Temperature Range | 0°C - 70°C |
| Lane Count | 8x (Tx/Rx) |
| Bandwidth | 2x 425 Gbit/s |
| Bandwidth Per Lane | 106.25 Gbit/s |
|---|---|
| Digital Diagnostic Monitoring (DDM) | Yes, internally calibrated |
| Power Consumption | 16.5 W |
| CDR | TX and RX |
| SGMII | No |
| Inbuilt FEC | Yes, KP4 |
| Powerbudget (dB) | 3.1 dB |
| Transmit min/max per lane | -0.8 dBm / 4.2 dBm |
| Receiver min/max per lane | -3.9 dBm / 4 dBm (overload) @400G |
| Wavelength TX (Typical) | 8x 1311 nm |
| Wavelength TX (Range) | 1304.5 - 1317.5 nm |
|---|---|
| Wavelength RX (Typical) | 8x 1311 nm |
| Laser | EML |
| Receiver Type | PIN |
| Modulation | PAM4 @400G |
| Transmit and Dispersion Penalty | 3.4 dB |
| Extinction Ratio | 3.5 dB |
| Supported Protocols | 2x 400G Ethernet, 4x 200G Ethernet, 800G Ethernet, 8x 100G Ethernet, 400G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to useCompatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Nvidia (ex. Mellanox) MMS4X00-NS-FLT compatible
What customers say
You guys rock! I have had the opportunity to use the previous version of FLEXBOX with my previous company. I cannot believe the progress you have made just in a year. Battery pack? Mobile reconfiguration? I am truly feeling lucky to have met you guys at Cloudfest. I will be honoured to demonstrate your products to startups as great examples to contribute to tech sustainability.
Our engineers spend a lot of time in data centers connecting switches and routers from different vendors. With the FLEXOPTIX service not only their task gets easier, also the back office doesn't have to have a broad range of optics from different vendors in stock anymore.
The days that an engineer stand next to a router with an optic from the wrong vendor are over. With the FLEXOPTIX FLEXBOX the engineer simply reconfigures the optic, and that’s that.
As an added benefit with the FLEXBOX there is no need to connect a new cross-connect to a device to see if it is connected on the other side. The measurement option that comes with the FLEXBOX are very handy!
FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.
Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models
now I can operate and adapt to each on site production.
We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!