800G Closed-Top OSFP 2x DR4 with dual CDR 500 m, 8x λ1311 nm, MTP/MPO-8/12 APC, Singlemode

- 8x 1311 nm
- 500 m
- 2x 425 G
- MTP/MPO-8/12
- 2x 200G ETH
- 2x 400G ETH
- 2x 400G NDR
- 400G ETH
- 800G ETH
- 8x 100G ETH
-
Alternatives
-
Matching Products
-
Alternatives
-
Matching Products
Specification
Form Factor | OSFP |
---|---|
Connector / Polish | 2x MTP/MPO-8/12 APC |
Interface | Singlemode |
Compliance Code | 2x DR4 |
Distance | 500 m |
Temperature Range | 0°C - 70°C |
Lane Count | 8x (Tx/Rx) |
Bandwidth | 2x 425 Gbit/s |
Bandwidth Per Lane | 106.25 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 16 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | Yes, KP4 |
Powerbudget (dB) | 3 dB |
Transmit min/max per lane | -2.9 dBm / 4.2 dBm |
Receiver min/max per lane | -5.9 dBm / 4 dBm (overload) @400G |
Wavelength TX (Typical) | 8x 1311 nm |
Wavelength TX (Range) | 1304.5 - 1317.5 nm |
---|---|
Wavelength RX (Typical) | 8x 1311 nm |
Laser | EML |
Receiver Type | PIN |
Modulation | PAM4 @400G |
Transmit and Dispersion Penalty | 3.4 dB |
Extinction Ratio | 3.5 dB |
Supported Protocols | 2x 200G Ethernet, 2x 400G Ethernet, 800G Ethernet, 800G Infiniband (2xNDR), 8x 100G Ethernet, 400G Ethernet |
Configure Transceiver Using Your FLEXSOX
It's that easy to use- Slide your FLEXBOX V4 into your FLEXSOX
- Connect it via USB
- Start our FLEXOPTIX App
- Insert a Universal Transceiver into the corresponding slot
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Juniper OSFP-2X400G-DR4-P compatible
- Nvidia (ex. Mellanox) MMS4X00-NM compatible
What customers say
FLEXBOX made my life a lot easier, adapting to multiple hardware in a breeze. I used fiber/SFP, RJ45/SFP, RJ45-10G/SFP for an esports production with different hardware brands and all of them worked instantly.
Before being a FLEXOPTER I had a lot of trouble communicating with my infrastructure and acquisitions team because of the complexity of compatibility between different brands and models
now I can operate and adapt to each on site production.