100G QSFP28 BiDi SR1.2 with dual CDR 100 m, 2x 850 / 910 nm, LC-Duplex, Multimode
- int. Mux
- 100 m
- 106.25 G
- LC
- 100G ETH
-
Matching Products
Our order confirmation will provide the final shipping date.
-
~Apr 26, 2024+100 pcs
Just go to cart and click CREATE QUOTE.
-
Matching Products
Specification
Form Factor | QSFP28 |
---|---|
Connector / Polish | LC-Duplex PC |
Interface | Multimode BiDi |
Compliance Code | BiDi SR1.2 |
Distance | 100 m |
Temperature Range | 0°C - 70°C |
Lane Count | 2x (Tx/Rx) |
Bandwidth | 106.25 Gbit/s |
Bandwith Per Lane | 53.13 Gbit/s |
Digital Diagnostic Management (DDM) | Yes, internally calibrated |
---|---|
Power Consumption | 4 W |
CDR | TX and RX |
SGMII | No |
Inbuilt FEC | Yes, KP4 |
Powerbudget (dB) | 3.8 dB |
Transmit min/max per lane | -4.4 dBm / 4 dBm |
Receiver min/max per lane | -8.2 dBm / 4 dBm (overload) @100G |
Wavelength TX (Typical) | 850 nm, 910 nm |
Wavelength RX (Typical) | 850 nm, 910 nm |
---|---|
Laser | VCSEL |
Receiver Type | PIN |
Modulation | PAM4 @100G |
Transmit and Dispersion Penalty | 4.5 dB |
Extinction Ratio | 3 dB |
Supported Protocols | 100G Ethernet |
Transceiver Configuration with FLEXBOX
It's that easy to use- Download and start our FLEXOPTIX App
- Connect your FLEXBOX via USB
- Insert a Universal Transceiver
- Choose vendor and compatibility
- Press play
- Configuration only takes a few seconds
- Use the transceiver in your device. That's it!
- Need it for another device? - Re-configure it again and again
Compatibility
All trademarks, registered companies & references cited are the sole property of their respective company and are used solely to assist in the identification of products.
- MSA Standard compatible
- Cisco Systems QSFP-100G-SR1.2 compatible
- Cisco Systems QSFP-100G-SR4-S compatible
- Fortinet FN-TRAN-QSFP28-BIDI compatible
What customers say
The new FLEXOPTIX 400GBASE-ZR modules are lit. We’ve been running a few of them in production and they just work. Awesome support from FLEXOPTIX. Keep up the good work!
We are realy happy with the FLEXBOX, programming FLEXOPTIX universal transceivers works like a charm.
Just insert, detect, select and start programming, now we are able to support hundreds off vendors with just a few standard SFP modules.
Amazing smart solution!